Read Sony HDR-CX190 / HDR-CX190E / HDR-CX200 / HDR-CX200E / HDR-CX210 / HDR-CX210E / HDR-PJ200 / HDR-PJ200E / HDR-PJ210 (serv.man2) Service Manual online
0 or dotted line with mark 0 are
critical for safety.
Replace only with part number
specified.
marque
Ne les remplacer que par une
pièce portant le numéro spécifié.
(A1 11-347)
(A2 12-020)
(A3 12-164)
(A4 12-186)
SERVICE MANUAL 9-834-637-34
with this Manual.
DCF
Internal
(1 7/16 in. ~ 35 1/2 in.) (16:9)
tion equivalent to the sizes described.
USB jack: mini-AB/Type A (Built-in USB)
(output
Total number of pixels: 230 400 (960 × 240)
Light source: LED (R/G/B)
Focus: Manual
Throw Distance: 0.5 m (1.6 feet) or over
Contrast ratio: 1500:1
Resolution (output): nHD (640 × 360)
Continuous projection time (when using the
Average power consumption:
HDR-CX190E:
(2 1/8 in. × 2 1/4 in. × 4 1/4 in.) (w/h/d)
including the projecting parts
(2 1/8 in. × 2 1/4 in. × 4 1/2 in.) (w/h/d)
including the projecting parts, and the
supplied rechargeable battery pack attached
(2 1/8 in. × 2 1/4 in. × 4 1/4 in.) (w/h/d)
including the projecting parts
(2 1/8 in. × 2 1/4 in. × 4 1/2 in.) (w/h/d)
including the projecting parts, and the
supplied rechargeable battery pack attached
(2 3/8 in. × 2 1/4 in. × 4 1/4 in.) (w/h/d)
including the projecting parts
(2 3/8 in. × 2 1/4 in. × 4 1/2 in.) (w/h/d)
including the projecting parts, and the
supplied rechargeable battery pack attached
HDR-CX190E:
Power consumption: 18 W
Output voltage: DC 8.4 V*
Operating temperature: 0 °C to 40 °C
(1 15/16 in. × 1 3/16 in. × 3 1/4 in.)
Output voltage: DC 7.2 V
Maximum charge voltage: DC 8.4 V
Maximum charge current: 2.12 A
Capacity
accessories are subject to change without notice.
• Manufactured under license from Dolby Labo-
HDR-CX190E/CX200E/CX210E/PJ200E.
HDR-CX190/CX200/CX210/PJ200.
DCF
Internal
(1 7/16 in. ~ 35 1/2 in.) (16:9)
tion equivalent to the sizes described.
USB jack: mini-AB/Type A (Built-in USB)
Total number of pixels: 230 400 (960 × 240)
Light source: LED (R/G/B)
Focus: Manual
Throw Distance: 0.5 m (1.6 feet) or over
Contrast ratio: 1500:1
Resolution (output): nHD (640 × 360)
Continuous projection time (when using the
Average power consumption:
HDR-CX190:
(2 1/8 in. × 2 1/4 in. × 4 1/4 in.) (w/h/d)
including the projecting parts
(2 1/8 in. × 2 1/4 in. × 4 1/2 in.) (w/h/d)
including the projecting parts, and the
supplied rechargeable battery pack attached
(2 1/8 in. × 2 1/4 in. × 4 1/4 in.) (w/h/d)
including the projecting parts
(2 1/8 in. × 2 1/4 in. × 4 1/2 in.) (w/h/d)
including the projecting parts, and the
supplied rechargeable battery pack attached
(2 3/8 in. × 2 1/4 in. × 4 1/4 in.) (w/h/d)
including the projecting parts
(2 3/8 in. × 2 1/4 in. × 4 1/2 in.) (w/h/d)
including the projecting parts, and the
supplied rechargeable battery pack attached
HDR-CX190:
Power consumption: 18 W
Output voltage: DC 8.4 V*
Operating temperature: 0 °C to 40 °C
(1 15/16 in. × 1 3/16 in. × 3 1/4 in.)
Output voltage: DC 7.2 V
Maximum charge voltage: DC 8.4 V
Maximum charge current: 2.12 A
Capacity
accessories are subject to change without notice.
• Manufactured under license from Dolby Labo-
ンファイルなどを含むため、実際に使用できる
容量は減少します。内蔵デモンストレーション
動画は削除が可能です。
います。
(幅×高さ×奥行き)
AC-L200C/AC-L200D
のため予告なく変更することがありますが、
ご了承ください。
(for flash)
(for flash)
AUS:
J:
Non Projector Model: HDR-CX190/CX190E/CX200/CX200E/CX210/CX210E
Non IM Model (Non Internal Memory Model): HDR-CX190/CX190E/CX200/CX200E/PJ200/PJ200E
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY
SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT
LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES
SUPPLÉMENTS PUBLIÉS PAR SONY.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
電池を交換する場合には必ず同じ型名の電池又は同等品と
交換してください。
使用済み電池は,取扱指示に従って処分してください。
bridges.
customer and recommend their replacement.
replacement.
6. Flexible Circuit Board Repairing
• Do not touch the soldering iron on the same conductor of the circuit
ネット,シャーシ,部品などにラベルや捺印で注意事項を
表示しています。これらの注意書き及び取扱説明書等の注
意事項を必ずお守り下さい。
ものとなっています。従って交換部品は,使用されていた
ものと同じ特性の部品を使用して下さい。特に回路図,部
品表に0印で指定されている安全上重要な部品は必ず指定
のものをご使用下さい。
プリント基板から浮かして取付けた部品があります。また
内部配線は引きまわしやクランパによって発熱部品や高圧
部品に接近しないよう配慮されていますので,これらは必
ずもとどおりにして下さい。
になっているか,またサービスした個所の周辺を劣化させ
てしまったところがないかなどを点検し,安全性が確保さ
れていることを確認して下さい。
Boards requiring use of unleaded solder are printed with the lead free
mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with the
for a short time.
Caution: The printed pattern (copper foil) may peel away if the
flow) than ordinary solder so use caution not to let solder
bridges occur such as on IC pins, etc.
leaded solder and leaded solder will cause detachment phenomenon.
本機には無鉛半田が使用されています。
無鉛半田を使用している基板には,無鉛(Lead Free)を意味する
レッドフリーマークがプリントされています。
す)
さい。
注意: 半田こてを長く当てすぎると,基板のパターン(銅
ください。また,従来の半田よりも粘性が強いため,
IC端子などが半田ブリッジしないように注意してく
ださい。
無鉛半田と有鉛半田が混在すると剥離現象が発生してしま
います。