Read Sony HDR-CX130 / HDR-CX130E / HDR-CX160 / HDR-CX160E / HDR-CX180 / HDR-CX180E (serv.man2) Service Manual online
HDR-CX130/CX130E/CX160/CX160E/CX180/CX180E_L2
3-2E
5
Roll the FP-1308 flexible board 1 times in
the Hinge Cover (U (370)) as shown in figure.
the Hinge Cover (U (370)) as shown in figure.
6
Attach the FP-1308 flexible board and the Control
Switch Block (SK37000) as shown in figure.
Switch Block (SK37000) as shown in figure.
Adhesive parts
Control Switch Block
(SK37000)
(SK37000)
FP-1308 Flexible
Board
Board
1 times
FP-1308 Flexible Board
Hinge Cover
(U (370))
(U (370))
Assembly-5: Installation Cautions of LCD Cushion.
Apply LCD cushion.
And have the Tab of the Release Paper and peel it off.
And have the Tab of the Release Paper and peel it off.
Align corner of
LCD cushion
with corner of LCD.
LCD cushion
with corner of LCD.
0.1mm
Long hole
LCD cushion
LCD cushion
White frame
Hole
LCD
Release Paper
Align shape of
LCD unit.
LCD unit.
Assembly-6: Installation Cautions of the Motor Harness.
Route the motor harness as shown in figure.
Insert the Motor Harness
to this groove.
to this groove.
Assembly-7: The Method of attachment of Cover (A), Cover
(B).
1
Install the two covers (B) and slide its.
2
Install the two covers (A) and slide its.
Cover (A)
Cover (B)
Cover (B)
Claw
Claw
Cover (A)
Cover (B)
Cover (B)
Cover (A)
Cover (A)
Claw
Claw
Assembly-8: The Method of attachment of Barrier Motor.
1
Install the magnet, coil yoke, coil, and the yoke.
Shaft
Magnet
Magnet
Magnet
Coil Yoke
Cutout
Lever
Shaft
Coil Yoke
Coil
Coil
Yoke
Yoke
Assembly-9: Installation Cautions of Name Ring.
Yoke
Yoke
Edge
Edge
Aligne the edge with the print characters,
and apply the Name Ring.
and apply the Name Ring.
