DEV-30, DEV-50, DEV-50V - Sony Movie Service Manual (repair manual). Page 3

Read Sony DEV-30 / DEV-50 / DEV-50V Service Manual online

DEV-30/50/50V_L3
2-1
(ENGLISH)
NOTE:
•  -XX, -X mean standardized parts, so they may have some dif-
ferences from the original one.
•  Items marked “*” are not stocked since they are seldom required 
for routine service. Some delay should be anticipated when 
ordering these items.
•  The mechanical parts with no reference number in the exploded 
views are not supplied.
•  Due to standardization, replacements in the parts list may be 
different from the parts specified in the diagrams or the com-
ponents used on the set.
• CAPACITORS:
 uF: 
μF
• COILS
 uH: 
μH
• RESISTORS
  All resistors are in ohms.
  METAL: metal-film resistor
  METAL OXIDE: Metal Oxide-film resistor
 F: 
nonflammable
• SEMICONDUCTORS
  In each case, u: μ, for example:
 uA...: 
μA... , uPA... , μPA... ,
 uPB... 
μPB... , μPC... , μPC... ,
 uPD..., 
μPD...
(JAPANESE)
【使用上の注意】 
•  ここに記載されている部品は,  補修用部品であるため,  回路図
及びセットに付いている部品と異なる場合があります。
•  -XX,  -Xは標準化部品のため,  セットに付いている部品と異な
る場合があります。
•  *印の部品は常備在庫しておりません。
•  コンデンサの単位でuFはμFを示します。
•  抵抗の単位Ωは省略してあります。
  金  被:金属被膜抵抗。
  サンキン:酸化金属被膜抵抗。
•  インダクタの単位でuHはμHを示します。
•  半導体の名称でuA...,  uPA...,  uPB...,  uPC...,  uPD...等はそれぞれ
μA..., μPA..., μPB..., μPC..., μPD...を示します。
2. REPAIR PARTS LIST
The components identified by mark 0 or 
dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque 
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant 
le numéro spécifié.
図面番号で部品を指定するときは基板名
又はブロックを併せて指定してください。
お願い
0印の部品,または0印付の点線で囲ま
れた部品は,安全性を維持するために,
重要な部品です。
従って交換時は,必ず指定の部品を使用
してください。
When indicating parts by reference
number,please include the board name.
   
A-1945-867-A  CABINET (TOP) BLOCK ASSY 
   
(Not supplied)  KY-1005 BOARD, COMPLETE
   
(Not supplied)  JY-1001 BOARD, COMPLETE
   
(Not supplied)  ZM-1001 BOARD, COMPLETE
   
 
***********************
(All mounted parts, KY-1005 COMPLETE BOARD, JY-1001 COMPLETE BOARD and 
ZM-1001 COMPLETE BOARD are not supplied, but they are included in CABINET 
(TOP) BLOCK ASSY.)
   
A-1851-196-A  CM-123 BOARD, COMPLETE (MAIN)
   
A-1851-196-A  CM-123 BOARD, COMPLETE (SUB)
   
 
****************************
(All mount parts are not supplied, but they are included in CM-123 COMPLETE BOARD 
(MAIN/SUB).)
   
1-887-911-11 
FP-2134 FLEXIBLE BOARD
  
 
*********************
   
1-887-912-11 
FP-2135 FLEXIBLE BOARD
  
 
*********************
   
1-887-914-11 
FP-2137 FLEXIBLE BOARD (MAIN)
   
1-887-914-11 
FP-2137 FLEXIBLE BOARD (SUB)
  
 
*********************
   
1-887-915-11 
FP-2138 FLEXIBLE BOARD
  
 
*********************
   
1-887-918-11 
FP-2141 FLEXIBLE BOARD
  
 
*********************
   
1-887-982-11 
FP-2147 FLEXIBLE BOARD
  
 
*********************
  
A-1938-584-A  GP405 
ASSY
   
(Not supplied)  GP-1009 BOARD, COMPLETE
   
 
***********************
(All mounted parts and GP-1009 COMPLETE BOARD are not supplied, but they are 
included in GP405 ASSY.)
  
A-1949-930-A  JKR 
BLOCK 
ASSY
   
(Not supplied)  JK-1005 BOARD, COMPLETE
   
 
***********************
(All mounted parts and JK-1005 COMPLETE BOARD are not supplied, but they are 
included in JKR BLOCK ASSY.)
Ref. No. 
Part No. 
Description
   
A-1945-742-A  LD-1009 BOARD, COMPLETE
   
 
***********************
(IC7701 and SE7701 are not supplied, but they are included in LD-1009 COMPLETE 
BOARD.)
   
 
< CAPACITOR >
 C7701  1-118-417-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C7702  1-114-411-21  CERAMIC 
CHIP  0.33uF  10%  6.3V
 C7703  1-118-417-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C7704  1-116-713-11  CERAMIC 
CHIP  22uF 
20%  10V
* C7705  1-118-407-11  CERAMIC CHIP  470PF 
10% 
50V
 C7706  1-118-388-11  CERAMIC 
CHIP  0.047uF  10%  25V
 C7707  1-118-388-11  CERAMIC 
CHIP  0.047uF  10%  25V
 C7708  1-118-417-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C7709  1-118-417-11  CERAMIC 
CHIP  0.1uF 
10%  16V
   
 
< CONNECTOR >
  CN5001  1-842-897-11 
CONNECTOR, FPC (ZIF) 45P
*  CN5002  1-821-503-11 
CONNECTOR, FPC (ZIF) 39P
  CN5003  1-816-654-61 
FFC/FPC CONNECTOR (LIF) 6P
   
 
< IC >
  IC7701  (Not supplied)  IC   NJM3232MG2 (TE2)
   
 
< RESISTOR >
* R7701  1-250-523-11  METAL CHIP 
15K 
1% 
1/16W
 R7702  1-218-979-11  METAL 
CHIP 
150K 
5% 
1/16W
 R7703  1-218-965-11  METAL 
CHIP 
10K 
5% 
1/16W
 R7704  1-218-969-11  METAL 
CHIP 
22K 
5% 
1/16W
 R7705  1-218-969-11  METAL 
CHIP 
22K 
5% 
1/16W
   
 
< SENSOR >
  SE7701  (Not supplied)  SENSOR, ANGULAR VELOCITY
   
A-1945-753-A  LD-1010 BOARD, COMPLETE
   
 
***********************
   
 
< CONNECTOR >
  CN5101  1-842-897-11 
CONNECTOR, FPC (ZIF) 45P
*  CN5102  1-821-503-11 
CONNECTOR, FPC (ZIF) 39P
  CN5104  1-778-506-21 
PIN, CONNECTOR (PC BOARD) 2P
   
A-1945-991-A  MS-1012 BOARD, COMPLETE (SERVICE)
   
 
********************************
(BT8001 is not included in MS-1012 COMPLETE BOARD (SERVICE).)
  
 
BATTERY>
 BT8001  1-756-134-15 
BATTERY, LITHIUM (SECONDARY)
   
 
< BATTERY HOLDER >
 BH8001  1-251-928-21 
SOCKET, BATTERY
   
 
< CAPACITOR >
 C7501  1-118-417-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C7502  1-118-417-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C7503  1-118-417-11  CERAMIC 
CHIP  0.1uF 
10%  16V
Ref. No. 
Part No. 
Description
Note 1:  Be sure to read “Precautions for Replacement of Imager” 
on page 6-1 when changing the Imager.
2-2.  ELECTRICAL PARTS LIST
KY-1005
JY-1001
ZM-1001
CM-123
FP-2134
FP-2135
FP-2137
FP-2138
FP-2141
FP-2147
GP-1009
JK-1005
LD-1009
LD-1010
MS-1012
Note 2:  Replace the battery holder (BH8001) together when 
replacing the lithium storage battery (BT8001) on the MS-
1012 board. 
 
(The battery holder removed once cannot be usedagain.)
 
When mounting these parts, mount new battery holder 
first and attach new lithium storage battery next.
Note 1:  イメージャの交換時は,6-1ページの"イメージャ交換時の
注意"を必ずお読みください。
Note 2:  MS-1012基板のリチウム蓄電池  (BT8001)  を交換する
場合はバッテリホルダ  (BH8001)  も同時に新品に交換し
てください。
 
(一度使用したバッテリホルダは再使用できません。)
 
部品取り付けの際は、先にバッテリホルダを取り付けて
からリチウム蓄電池を装着してください。
注意
電池の交換は、正しく行わないと破裂する恐れがあります。
電池を交換する場合には必ず同じ型名の電池又は同等品と交換し
てください。
使用済み電池は、取扱指示に従って処分してください。
Caution
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
Page of 61
Display

Click on the first or last page to see other DEV-30 / DEV-50 / DEV-50V service manuals if exist.