Read Sony DCR-VX2200E (serv.man2) Service Manual online
6-20
DCR-VX2200E_ADJ
20. BF Page table
Note 1:
Note 1:
If reading/writing data on pages BF, set data: 0B to page:
0, address: 10, and then select pages: F. By this data set-
ting, the pages BF can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: F. By this data set-
ting, the pages BF can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to 44
Fixed data-1 (Initialized data)
45
Fixed data-2
46 to 63
Fixed data-1 (Initialized data)
64 to 6A
Fixed data-2
6B to BC
Fixed data-1 (Initialized data)
BD
Fixed data-2
BE to FF
Fixed data-1 (Initialized data)
21. C2 Page table
Note 1:
Note 1:
If reading/writing data on pages C2, set data: 0C to page:
0, address: 10, and then select pages: 2. By this data set-
ting, the pages C2 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 2. By this data set-
ting, the pages C2 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to FF
Fixed data-1 (Initialized data)
22. C3 Page table
Note 1:
Note 1:
If reading/writing data on pages C3, set data: 0C to page:
0, address: 10, and then select pages: 3. By this data set-
ting, the pages C3 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 3. By this data set-
ting, the pages C3 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to FF
Fixed data-1 (Initialized data)
23. C4 Page table
Note 1:
Note 1:
If reading/writing data on pages C4, set data: 0C to page:
0, address: 10, and then select pages: 4. By this data set-
ting, the pages C4 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 4. By this data set-
ting, the pages C4 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to FF
Fixed data-1 (Initialized data)
24. C5 Page table
Note 1:
Note 1:
If reading/writing data on pages C5, set data: 0C to page:
0, address: 10, and then select pages: 5. By this data set-
ting, the pages C5 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 5. By this data set-
ting, the pages C5 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to FF
Fixed data-1 (Initialized data)
25. C6 Page table
Note 1:
Note 1:
If reading/writing data on pages C6, set data: 0C to page:
0, address: 10, and then select pages: 6. By this data set-
ting, the pages C6 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 6. By this data set-
ting, the pages C6 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to D4
Fixed data-1 (Initialized data)
26. C7 Page table
Note 1:
Note 1:
If reading/writing data on pages C7, set data: 0C to page:
0, address: 10, and then select pages: 7. By this data set-
ting, the pages C7 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 7. By this data set-
ting, the pages C7 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to FF
Fixed data-1 (Initialized data)
Click on the first or last page to see other DCR-VX2200E (serv.man2) service manuals if exist.