Read Sony DCR-VX2100 / DCR-VX2100E (serv.man4) Service Manual online
6-53
DCR-VX2100/VX2100E
2. Recording System Check
2-1. Preparations for recording
Note: NTSC model : DCR-VX2100
PAL model
: DCR-VX2100E
Order Page Address Data
Procedure
1
Playback the BIST check tape.
(XH5-6(NTSC), XH5-6P(PAL))
(XH5-6(NTSC), XH5-6P(PAL))
2
3
10
C0
Set the data, and press PAUSE
button.
button.
3
3
11
07
Set the data, and press PAUSE
button.
button.
4
Enter the stop mode.
5
While keep the HOLD switch of
the adjustment remote
commander at ON (SERVICE)
position, eject the BIST check
tape.
the adjustment remote
commander at ON (SERVICE)
position, eject the BIST check
tape.
6
Close the cassette compartment
without inserting a cassette.
without inserting a cassette.
7
Set the power switch to
“CAMERA”.
“CAMERA”.
8
3
01
0C
Set the data, and press PAUSE
button.
button.
2-2. IC301 TRX (RF) REC BIST Check
Order Page Address Data
Procedure
1
3
70
04
Set the data, and press PAUSE
button.
button.
2
3
70
00
Set the data, and press PAUSE
button.
button.
3
3
71
Check that the data is equal to
either of the following values.
And memorize the case number
of the value.
NTSC model:
either of the following values.
And memorize the case number
of the value.
NTSC model:
26 (Case1), 5E (Case2)
PAL model:
53 (Case1), 77 (Case2)
4
3
72
Check that the data is equal to
the following value which case
number is equal to that of
address 71.
NTSC model:
the following value which case
number is equal to that of
address 71.
NTSC model:
95 (Case1), E3 (Case2)
PAL model:
DF (Case1), D5 (Case2)
5
3
If the data of address 71 and
address 72 are correct, IC301
TRX (RF) recording system is
normal.
address 72 are correct, IC301
TRX (RF) recording system is
normal.
2-3. Processing after Completing Recording System
Check
Order Page Address Data
Procedure
1
3
01
00
Set the data, and press PAUSE
button.
button.
2
Turn off the power and turn on
again.
again.
Click on the first or last page to see other DCR-VX2100 / DCR-VX2100E (serv.man4) service manuals if exist.