Read Sony DCR-VX2100 / DCR-VX2100E (serv.man3) Service Manual online
106
Labeling a cassette
To change the label you have made
Insert the cassette to change the label, and operate in the same way as you do to make a
new label.
new label.
If you set the write-protect tab of the tape to lock
You cannot label the tape. Slide the write-protect tab to release the write protection.
You cannot label the tape. Slide the write-protect tab to release the write protection.
If you have superimposed titles in the cassette
When the label is displayed, up to four titles also appear.
When the label is displayed, up to four titles also appear.
When the “-----” indicator has fewer than 10 spaces
The cassette memory is full.
The “-----” indicates the number of characters you can select for the label.
The cassette memory is full.
The “-----” indicates the number of characters you can select for the label.
To erase a character
Turn the SEL/PUSH EXEC dial to select [
Turn the SEL/PUSH EXEC dial to select [
C ], then press the dial. The last character is
erased.
To enter a space
Select [
Select [
], then select the blank part.
Click on the first or last page to see other DCR-VX2100 / DCR-VX2100E (serv.man3) service manuals if exist.