Read Sony DCR-TRV75 / DCR-TRV75E / DCR-TRV80 / DCR-TRV80E (serv.man3) Service Manual online
15
Recording still images on the “Memory Stick”
(p. 139)
Monitoring the playback still image on the LCD
screen
(p. 166)
When you purchase your camcorder, the clock setting is set to off. If you want to record the date
and time for a picture, set the clock setting before recording (p. 30).
and time for a picture, set the clock setting before recording (p. 30).
3
Press OPEN
to open the
LCD panel.
The picture
appears on
the screen.
to open the
LCD panel.
The picture
appears on
the screen.
1
Remove the lens cap (p. 36).
5
Press PHOTO deeply.
The image when you
pressed PHOTO deeply will
be recorded on the “Memory
Stick.”
The image when you
pressed PHOTO deeply will
be recorded on the “Memory
Stick.”
12
FINE
640
Viewfinder
When the LCD panel is
closed, use the
viewfinder with your
eye against the eyecup.
Adjust the viewfinder
lens to your eyesight
(p. 43).
When the LCD panel is
closed, use the
viewfinder with your
eye against the eyecup.
Adjust the viewfinder
lens to your eyesight
(p. 43).
FINE
640
2
Set the POWER switch
to MEMORY while
pressing the small green
button.
pressing the small green
button.
Make sure that the
LOCK switch is set to
the left (unlock)
position.
the left (unlock)
position.
4
Press PHOTO lightly.
When the green ● mark
stops flashing, then lights
up, you can record a still
image.
When the green ● mark
stops flashing, then lights
up, you can record a still
image.
VCR
MEMORY/
NETWORK
CAMERA
OFF(CHG)
PO
WER
1
Set the POWER
switch to MEMORY
while pressing the
small green button.
switch to MEMORY
while pressing the
small green button.
2
Press PLAY. The last
recorded image is
displayed.
recorded image is
displayed.
VCR
MEMORY/
NETWORK
CAMERA
OFF(CHG)
POWER
PLAY
Do not pick up your camcorder
by holding parts as illustrated.
by holding parts as illustrated.
Viewfinder
Flash
LCD panel
Battery pack
Quick Start Guide
Click on the first or last page to see other DCR-TRV75 / DCR-TRV75E / DCR-TRV80 / DCR-TRV80E (serv.man3) service manuals if exist.