Read Sony DCR-TRV738E / DCR-TRV740 / DCR-TRV740E / DCR-TRV840 (serv.man4) Service Manual online
— 12 —
DCR-TRV738E/TRV740/TRV740E/TRV840
INCORRECT
CORRECT
1-3.
CAMERA SYSTEM ADJUSTMENTS
2. Flange Back Adjustment
(Using Minipattern Box)
Note1:
Dark Siemens star chart.
Note2:
This adjustment should be carried out upon completion of
“HALL adjustment”.
“HALL adjustment”.
Note3:
Make the lens horizontal and perform this adjustment.
Note4:
The data of page: 0, address: 10 must be “00”.
Note5:
Check that the data of page: 6, address: 02 is “00”. If not, set
data: 00 to this address, and press the PAUSE button.
data: 00 to this address, and press the PAUSE button.
3. Flange Back Adjustment
(Using Flange Back Adjustment Chart and
Subject More Than 500m Away)
Subject More Than 500m Away)
3-1. Flange Back Adjustment (1)
Note1:
This adjustment should be carried out upon completion of
“HALL adjustment”.
“HALL adjustment”.
Note2:
Make the lens horizontal and perform this adjustment.
Note3:
The data of page: 0, address: 10 must be “00”.
Note4:
Check that the data of page: 6, address: 02 is “00”. If not, set
data: 00 to this address, and press the PAUSE button.
data: 00 to this address, and press the PAUSE button.
3-2. Flange Back Adjustment (2)
Note1:
Make the lens horizontal and perform this adjustment.
Note2:
The data of page: 0, address: 10 must be “00”.
Note3:
Check that the data of page: 6, address: 02 is “00”. If not, set
data: 00 to this address, and press the PAUSE button.
data: 00 to this address, and press the PAUSE button.
6. Black Defective CCD Adjustment
Note1:
Shoot the clear chart with the zoom WIDE end. And adjust
the direction of the camera so that the whole of the screen is
white.
the direction of the camera so that the whole of the screen is
white.
Note2:
When reading or writing the 1E page data, select page: 0,
address: 10, and set data: 01, then select E page. The 1E page
can be chosen by this data setting.
After reading or writing, reset the data of page: 0, address: 10
to “00”.
address: 10, and set data: 01, then select E page. The 1E page
can be chosen by this data setting.
After reading or writing, reset the data of page: 0, address: 10
to “00”.
Note3:
This adjustment should be carried out upon completion of the
following adjustment.
following adjustment.
Flange Back Adjustment
Note4:
Check that the data of page: 6, address: 02 is “00”. If not, set
data: 00 to this address, and press the PAUSE button.
data: 00 to this address, and press the PAUSE button.
1-3.
CAMERA SYSTEM ADJUSTMENTS
2. Flange Back Adjustment
(Using Minipattern Box)
Note1:
Dark Siemens star chart.
Note2:
This adjustment should be carried out upon completion of
“HALL adjustment”.
“HALL adjustment”.
Note3:
Make the lens horizontal and perform this adjustment.
Note4:
The data of page: 0, address: 10 must be “00”.
Note5:
Check that the data of page: 6, address: 02 is “00”. If not, to
page: 6, address: 01, set data:00, and press the PAUSE button.
page: 6, address: 01, set data:00, and press the PAUSE button.
3. Flange Back Adjustment
(Using Flange Back Adjustment Chart and
Subject More Than 500m Away)
Subject More Than 500m Away)
3-1. Flange Back Adjustment (1)
Note1:
This adjustment should be carried out upon completion of
“HALL adjustment”.
“HALL adjustment”.
Note2:
Make the lens horizontal and perform this adjustment.
Note3:
The data of page: 0, address: 10 must be “00”.
Note4:
Check that the data of page: 6, address: 02 is “00”. If not, to
page: 6, address: 01, set data:00, and press the PAUSE button.
page: 6, address: 01, set data:00, and press the PAUSE button.
3-2. Flange Back Adjustment (2)
Note1:
Make the lens horizontal and perform this adjustment.
Note2:
The data of page: 0, address: 10 must be “00”.
Note3:
Check that the data of page: 6, address: 02 is “00”. If not, to
page: 6, address: 01, set data:00, and press the PAUSE button.
page: 6, address: 01, set data:00, and press the PAUSE button.
6. Black Defective CCD Adjustment
Note1:
Shoot the clear chart with the zoom WIDE end. And adjust
the direction of the camera so that the whole of the screen is
white.
the direction of the camera so that the whole of the screen is
white.
Note2:
When reading or writing the 1E page data, select page: 0,
address: 10, and set data: 01, then select E page. The 1E page
can be chosen by this data setting.
After reading or writing, reset the data of page: 0, address: 10
to “00”.
address: 10, and set data: 01, then select E page. The 1E page
can be chosen by this data setting.
After reading or writing, reset the data of page: 0, address: 10
to “00”.
Note3:
This adjustment should be carried out upon completion of the
following adjustment.
following adjustment.
Flange Back Adjustment
Note4:
Check that the data of page: 6, address: 02 is “00”. If not, to
page: 6, address: 01, set data:00, and press the PAUSE button.
page: 6, address: 01, set data:00, and press the PAUSE button.
[ CORRECTION ]
Correct your service manual as shown below.
SECTION 5. ADJUSTMENTS
:
Changed portion.
Page
5-21
5-22
5-24
Click on the first or last page to see other DCR-TRV738E / DCR-TRV740 / DCR-TRV740E / DCR-TRV840 (serv.man4) service manuals if exist.