Read Sony DCR-TRV60 / DCR-TRV60E / DCR-TRV70 (serv.man4) Service Manual online
6-3
DCR-TRV60/TRV60E/TRV70
Board
EEPROM
replacement
replacement
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
Table. 6-1-1 (2).
• Adjusting items when replacing a board or EEPROM
When replacing a board or EFPROM, adjust the items indicated by
z
in the following table.
Note2:
When the repair is finished, confirm
the following items.
the following items.
1.
Shoot the all black subject (Attach
the lens cap and shoot), and confirm
that a vertical line is not displayed
in the center of the screen, and that
there is no difference in left-right
brightness level of the screen.
the lens cap and shoot), and confirm
that a vertical line is not displayed
in the center of the screen, and that
there is no difference in left-right
brightness level of the screen.
2.
Shoot a subject of low light, and
confirm that a vertical line is not
displayed in the center of the screen,
and that there is no difference in
left-right brightness level of the
screen.
confirm that a vertical line is not
displayed in the center of the screen,
and that there is no difference in
left-right brightness level of the
screen.
3.
Shoot a subject of normal light, and
confirm that a vertical line is not
displayed in the center of the screen,
and that there is no difference in
left-right brightness level of the
screen.
When the above symptom occurs,
perform the whole process of “CCD
Output 2ch Matching Adjustment”.
confirm that a vertical line is not
displayed in the center of the screen,
and that there is no difference in
left-right brightness level of the
screen.
When the above symptom occurs,
perform the whole process of “CCD
Output 2ch Matching Adjustment”.
Note3:
When replacing the VC-314 board,
before and after replacing, perform
“Writing the Network Default
Setting Value” and initialize the
personal network information (Mail
address, bookmark etc.). (DCR-
TRV70)
(Refer to “1-2-2. INITIALIZATION
OF B, 1B PAGE DATA”.)
before and after replacing, perform
“Writing the Network Default
Setting Value” and initialize the
personal network information (Mail
address, bookmark etc.). (DCR-
TRV70)
(Refer to “1-2-2. INITIALIZATION
OF B, 1B PAGE DATA”.)
Note4:
When the flash error code (E:91:**)
is displayed. After repair, clear the
error flag. (Refer to “Record of
Self-diagnosis check” of “6-4.
SERVICE MODE”.)
is displayed. After repair, clear the
error flag. (Refer to “Record of
Self-diagnosis check” of “6-4.
SERVICE MODE”.)
CD-433 board
(COMPLETE)
LB-086 board
(COMPLETE)
PD-189 board
(COMPLETE)
DI-088 board
(COMPLETE)
VC-314 board
(COMPLETE) Note3
VC-314 board
IC2602 (EEPR
OM)
VC-314 board
IC2702 (EEPR
OM)
VC-314 board
IC2803 (Flash memory)
Supporting
Adjustment Section
Initialization of
8,A,B,C,D,E,F,18,1B,
1C,1E,1F page data
Camera
Color EVF
LCD
Mechanism
System control
Servo, RF
Video
Adjustment
Initialization of A, D page data
Initialization of B, 1B page data
Initialization of 8, C, 18, 1C page data
Initialization of E, F, 1E, 1F page data
54MHz/67.5MHz origin oscillation adj.
HALL adj.
MR adj.
CCD output 2ch matching adj.
Flange back adj.
MAX GAIN adj.
Color reproduction adj.
LV standard data input
Auto white balance standard data input
Auto white balance adj.
Mechanical shutter adj.
Steady shot check
Strobe light level adjustment
Strobe white balance adjustment & check
AF laser output adj.
VCO adj.
RGB AMP adj.
Contrast adj.
White balance adj.
VCO adj.
LCD automatic adj.
V COM adj.
White balance adj.
Tape path adj.
Touch panel adj.
Serial No. input
CAP FG duty adj.
Switching position adj.
Error rate check
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
Click on the first or last page to see other DCR-TRV60 / DCR-TRV60E / DCR-TRV70 (serv.man4) service manuals if exist.