Read Sony DCR-TRV40E / DCR-TRV50E Service Manual online
— 21 —
DCR-TRV40E/TRV50E
2-17. CD-381 BOARD, 690C (CZ) BLOCK ASSEMBLY (LENS DEVICE)
A
B
A
B
3
Tapping screw
(M1.7
×
3.5)
6
CD heat sink assembly
5
JK-219 board
Lens frame
7
CD-381 board,
690C (CZ) block assembly
(Lens device)
(Lens device)
2
Antenna (2.4G)
1
Two screws
(M1.7
×
2.5),
lock ace, p2
4
Tapping screw
(M1.7
×
3.5)
(TRV50E)
2-18. GRIP COVER
1
Two screws (M1.7
×
4),
lock ace, p2
2
Grip cover
3
Turn over the insulating sheet
4
Flash unit
Shorting jig
(1k
(1k
Ω
/ 1w)
Power supply
capacitor
The power supply capacitor of the Flash unit is
charged to the voltage as high as 300 V at a
maximum. The high voltage is not discharged
even after the main power of the machine is
simply turned off and the charged potential still
remains.
Discharge the residual voltage by referring to
Service Note (page XX).
charged to the voltage as high as 300 V at a
maximum. The high voltage is not discharged
even after the main power of the machine is
simply turned off and the charged potential still
remains.
Discharge the residual voltage by referring to
Service Note (page XX).
Caution
Caution
Click on the first or last page to see other DCR-TRV40E / DCR-TRV50E service manuals if exist.