Read Sony DCR-TRV40 / DCR-TRV40E / DCR-TRV50 / DCR-TRV50E Service Manual online
5-23
DCR-TRV40/TRV40E/TRV50/TRV50E
4. CCD Output 2ch Matching Adjustment (1)
Correct the dispersion of the black level between the left-right
channels of the CCD imager.
channels of the CCD imager.
Subject
Arbitrary
Adjustment Page
F
Adjustment Address
26, 27
Note1:
This adjustment should be carried out upon completion of the
following adjustments.
following adjustments.
“HALL Adjustment”, “MAX GAIN Adjustment”
Note2:
The data of page: 0, address: 10 must be “00”.
Note3:
Check that the data of page: 6, address: 02 is “00”. If not, to page:
6, address: 01, set data: 00, and press the PAUSE button.
6, address: 01, set data: 00, and press the PAUSE button.
Switch setting:
1)
1)
POWER .................................................................. CAMERA
2)
NIGHT SHOT .................................................................. OFF
Adjusting method:
Order Page Address Data
Procedure
1
0
01
01
Set the data.
2
6
01
F3
Set the data, and press PAUSE
button.
button.
3
6
02
Check that the data changes to
“01”. (Note4)
“01”. (Note4)
Note4:
The adjustment data will be automatically input to page: F, address:
26, 27.
26, 27.
Processing after Completing Adjustments
Order Page Address Data
Procedure
1
6
01
00
Set the data, and press PAUSE
button.
button.
2
Perform “CCD Output 2ch
Matching Adjustment (2)”.
Matching Adjustment (2)”.
3. MAX GAIN Adjustment
Setting the minimum illumination.
If it is not consistent, the image level required for taking subjects in
low illuminance will not be produced (dark).
If it is not consistent, the image level required for taking subjects in
low illuminance will not be produced (dark).
Subject
Clear chart (Approx. 1m from the
front of the lens) (Note1)
front of the lens) (Note1)
Adjustment Page
F
Adjustment Address
19
Note1:
Shoot the clear chart with the zoom WIDE end. And adjust the
direction of the camera so that the chart is located in the center of
the screen.
direction of the camera so that the chart is located in the center of
the screen.
Note2:
The data of page: 0, address: 10 must be “00”.
Switch setting:
1)
1)
POWER .................................................................. CAMERA
2)
NIGHT SHOT .................................................................. OFF
3)
ZOOM .................................................................... WIDE end
4)
DIGITAL ZOOM (Menu display) ................................... OFF
5)
STEADY SHOT (Menu display) ..................................... OFF
Adjusting method:
Order Page Address Data
Procedure
1
0
01
01
Set the data.
2
6
2C
01
Set the data.
3
6
40
01
Set the data.
4
6
96
Set the following data.
33 (NTSC), 2B (PAL)
33 (NTSC), 2B (PAL)
5
6
97
00
Set the data.
6
6
01
6F
Set the data, and press PAUSE
button.
button.
7
6
02
Check that the data changes to
“01”. (Note3)
“01”. (Note3)
Note3:
The adjustment data will be automatically input to page: F, address:
19.
19.
Processing after Completing Adjustments
Order Page Address Data
Procedure
1
6
2C
00
Set the data.
2
6
40
00
Set the data.
3
6
96
00
Set the data.
4
6
97
00
Set the data.
5
6
01
00
Set the data, and press PAUSE
button.
button.
6
0
01
00
Set the data.
Click on the first or last page to see other DCR-TRV40 / DCR-TRV40E / DCR-TRV50 / DCR-TRV50E service manuals if exist.