Read Sony DCR-TRV38 / DCR-TRV38E / DCR-TRV39 (serv.man2) Service Manual online
2-11
DCR-TRV38/TRV38E/TRV39
2-15.VF LENS ASSEMBLY
A
2
Two tapping screws
(M1.7
×
5)
4
VF base
assembly
qa
VF lens assembly
9
LB-087 board,
Lamp guide
6
FP-435 Flexible
board (20P)
7
LCX033AN-J (16P)
qf
LB-087 board
qd
Lamp guide
8
Three claws
0
Four claws
5
VF electrostatic
sheet
3
Two claws
qs
Two claws
1
Raise the EVF in the
direction of the arrow
A
.
Prism sheet
Illuminator
LCX033AN-J
LCD Cushion
When separating the
9
LB-087 board and
Lamp guide from the
qs
VF lens assembly
by removing the three
8
claws, do not face
the side of the VF lens assembly on which
the LB-087 board is installed, downwards.
Because the Illuminator and others may fall
out of the VF lens assembly, hold the
illuminator and others using tape or paper
as shown to prevent them from falling.
Be careful on this point especially when
removing the LB-087 board and Lamp guide
because the three claws located in the VF
lens assembly are easy to break.
the LB-087 board is installed, downwards.
Because the Illuminator and others may fall
out of the VF lens assembly, hold the
illuminator and others using tape or paper
as shown to prevent them from falling.
Be careful on this point especially when
removing the LB-087 board and Lamp guide
because the three claws located in the VF
lens assembly are easy to break.
Hold the illuminator
and others using
tape or paper as
shown to prevent
them from falling.
and others using
tape or paper as
shown to prevent
them from falling.
Caution
Click on the first or last page to see other DCR-TRV38 / DCR-TRV38E / DCR-TRV39 (serv.man2) service manuals if exist.