DCR-TRV360, DCR-TRV361, DCR-TRV460, DCR-TRV460E, DCR-TRV461E (serv.man3) - Sony Movie Service Manual (repair manual). Page 123

Read Sony DCR-TRV360 / DCR-TRV361 / DCR-TRV460 / DCR-TRV460E / DCR-TRV461E (serv.man3) Service Manual online

D:\##SAGYO\DTP-shanhai-agari\824719S DCRTRV360-US\824719S DCR-TRV360_US\824719S DCR-
TRV360_US\3087921111 DCR-TRV360\01GB09ADD.fm
master:Right
Ad
d
itio
n
a
l In
fo
rm
a
tio
n
DCR-TRV360/TRV361/TRV460
3-087-921-11(1)
Additional Information
115
Usable cassette 
tapes
You can use standard 8 mm 
 and Hi8 
Digital8 
 video cassettes on your camcorder.
Digital8  
system
This video system has been developed to enable 
digital recording to Hi8 
/Digital8 
 video 
cassette.
The recording time when you use your 
Digital8 
 system camcorder on Hi8 
/
standard 8 mm 
 tape is half of the recording 
time when using the conventional Hi8 
/
standard 8 mm 
 system camcorder. (120 
minutes of recording time becomes 60 minutes 
in the SP mode.) 
Hi8  
system
This Hi8 
 system is an extension of the 
standard 8 mm 
 system, and was developed to 
produce higher quality pictures.
You cannot play back a tape recorded in the 
Hi8 
 system correctly on video recorders/
players other than a Hi8 video recorder/player.
To prevent a blank section from being 
made on the tape
Touch 
 to go to the end of the recorded 
section before you begin the next recording in 
the following cases:
– You have ejected the cassette during 
recording.
– You have played back the tape.
– You have used EDIT SEARCH.
If there is a blank section or discontinuous 
signals on your tape, re-record from the 
beginning to the end of the tape as described 
above.
Copyright signal
When you play back
If the cassette you play back on your camcorder 
contains copyright signals, you cannot copy it to 
a tape in another video camera connected to 
your camcorder.
When you record
You cannot record software on your 
camcorder that contains copyright 
control signals for copyright protection 
of software.
[Cannot record due to copyright protection.] 
appears on the LCD screen, or on the TV screen 
if you try to record such software. 
Your camcorder does not record copyright 
control signals on the tape when it records.
Notes on use
To prevent accidental erasure
Slide the write-protect tab on the cassette to set 
to SAVE.
REC: The cassette can be recorded.
SAVE: The cassette cannot be recorded (write-
protected).
When labeling the cassette
Be sure to place the label only on the locations 
as shown in the following illustration so as not 
to cause malfunction of your camcorder.
After using the cassette
Rewind the tape to the beginning to avoid 
distortion of the picture or the sound. The 
cassette should then be put in its case, and stored 
in an upright position.
 and 
 are trademarks.
Labeling position
Do not put a label 
along the border.
Page of 127
Display

Click on the first or last page to see other DCR-TRV360 / DCR-TRV361 / DCR-TRV460 / DCR-TRV460E / DCR-TRV461E (serv.man3) service manuals if exist.