DCR-TRV360, DCR-TRV361, DCR-TRV460, DCR-TRV460E, DCR-TRV461E (serv.man2) - Sony Movie Service Manual (repair manual)

dcr-trv360, dcr-trv361, dcr-trv460, dcr-trv460e, dcr-trv461e (serv.man2) service manual
Model
DCR-TRV360 DCR-TRV361 DCR-TRV460 DCR-TRV460E DCR-TRV461E (serv.man2)
Pages
62
Size
5.27 MB
Type
PDF
Document
Service Manual
Brand
Device
Movie / LEVEL 2
File
dcr-trv360-dcr-trv361-dcr-trv460-dcr-trv460e-dcr-t.pdf
Date

Read Sony DCR-TRV360 / DCR-TRV361 / DCR-TRV460 / DCR-TRV460E / DCR-TRV461E (serv.man2) Service Manual online

SERVICE MANUAL
DIGITAL VIDEO CAMERA RECORDER
LEVEL
 
2
Link
SERVICE NOTE
DISASSEMBLY
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SPECIFICATIONS
SERVICE NOTE
DISASSEMBLY
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SPECIFICATIONS
Link
Revision History
Revision History
M2000/M2200 MECHANISM
Ver 1.1  2005.06
• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (987629351.pdf).
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL1 (987629341.pdf).
• For MECHANISM ADJUSTMENTS, refer to the “8mm Video MECHANICAL ADJUSTMENT MANUAL 
IX
 M2000 MECHANISM  ” (9-929-861-11).
• Reference No. search on printed wiring boards is available.
• Table for differences of function of each model.
• TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)
• HELP: Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E
RMT-831
US Model
DCR-TRV360/TRV460
Canadian Model
DCR-TRV460
AEP Model
UK Model
East European Model
North European Model
Australian Model
DCR-TRV460E
E Model
DCR-TRV361/TRV460/TRV460E/TRV461E
On the VC-345 board
This service manual provides the information that is premised the circuit board replacement service and not intended repair
inside the VC-345 board.
Therefore, schematic diagrams, printed wiring boards, mounted parts location and electrical parts list of the VC-345 board are
not shown.
The following pages are not shown.
Schematic diagrams ........................... Pages 4-9 to 4-44
Printed wiring boards .......................... Pages 4-59 to 4-62
Mounted parts location .................. Pages 4-69 and 4-70
Electrical parts list ......................... Pages 5-16 to 5-24
How to use
Acrobat Reader
How to use
Acrobat Reader
Photo: DCR-TRV460
— 2 —
DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E
SPECIFICATIONS
Video camera recorder
System
Video recording system
2 rotary heads, Helical scanning system
Still image recording system
Exif Ver. 2.2*
1
*
1
Exif  is a file format for still images, 
established by the JEITA (Japan 
Electronics and Information Technology 
Industries Association). Files in this format 
can have additional information such as 
your camcorder s se tting information at the 
time of recording.
Audio recording system
Rotary heads, PCM system
Quantization: 12 bits (Fs 32 kHz, stereo 1, 
stereo 2), 16 bits (Fs 48 kHz, stereo)
Video signal
NTSC
PAL color, CCIR standards
 color, EIA standards
Usable cassette
8 mm video format cassette
Tape speed
SP: Approx. 28.67 mm/s
LP: Approx. 19.11 mm/s
Recording/play back time
SP: 60 min
LP: 90 min
Fast forward/rewind time 
Approx. 5 min
Viewfinder
Electric viewfinder (monochrome)
Image device
3.0 mm (1/6 type) CCD (Charge Coupled 
Device)
Gross: Approx. 460 000 pixels
Effective (still): Approx. 350 000 pixels
Effective (movie): Approx. 350 000 pixels
Effective (still): Approx. 290 000 pixels
Effective (movie): Approx. 290 000 pixels
Lens
Combined power zoom lens
Filter diameter: 37 mm (1 7/16 in.)
20 
× (Optical), 990 × (Digital)
F = 1.6 ~ 2.4
Focal length
2.5 - 50 mm (1/8 - 2 in.)
When converted to a 35 mm still camera
In CAMERA-TAPE:
42 - 840 mm (1 11/16 - 33 1/8 in.)
In CAMERA-MEMORY:
42 - 840 mm (1 11/16 - 33 1/8 in.)
Color temperature
Auto
Minimum illumination
4 lx (lux) (F 1.6)
0 lx (lux) (during the NightShot plus 
function)*
2
*
2
Objects unable to be seen due to the dark can 
be shot with infrared lighting.
Input/Output connectors
S video input/output
Luminance signal: 1 Vp-p, 75 
Ω (ohms), 
unbalanced
Chrominance signal: 
75 
Ω (ohms), unbalanced
4-pin mini DIN
Audio/Video input/output
AV MINIJACK 
Video signal: 1 Vp-p, 75 
Ω (ohms), 
unbalanced, sync negative
Audio signal: 327 mV (at output impedance 
more than 47 k
Ω (kilohms)), Input impedance
 
 
more than  47  k
Ω (kilohms), Output impedance
with less than 2.2 k
Ω (kilohms)
Stereo minijack (
φ 3.5mm)
DV input/output
4-pin connector
USB jack
mini-B
LCD screen
Picture
6.2 cm (2.5 type)
Total dot number
123 200 (560 
× 220)
General
Power requirements
DC 7.2 V (battery pack)
DC 8.4 V (AC Adaptor)
Average power consumption (when using the 
battery pack)
During camera recording using the viewfinder
2.9 W
During camera recording using the LCD
3.8 W
Operating temperature
0
° C to 40° C (32° F to 104° F)
Storage temperature
-20
° C to + 60° C (-4° F to + 140° F)
Dimensions (approx.)
85 
× 98 × 151 mm (3 3/8 × 3 7/8 × 6 in.)
 
(w/h/d)
Mass (Approx.)
800 g (1 lb 12 oz) main unit only
940 g (2 lb 1 oz) including the NP-FM30 
rechargeable battery pack, Hi8/Digital8 
cassette, lens cap, and shoulder strap.
Supplied accessories
See page 7.
AC Adaptor AC-L15A/L15B
Power requirements
AC 100 - 240 V, 50/60 Hz
Current consumption
0.35 - 0.18 A
Power consumption
18 W
Output voltage
DC 8.4 V, 1.5 A
Operating temperature
0
° C to 40° C (32° F to 104° F)
Storage temperature
-20
° C to + 60° C (-4° F to + 140° F)
Dimensions (approx.)
56 
× 31 × 100 mm (2 1/4 × 1 1/4 × 4 in.) (w/h/ 
d) excluding the projecting parts
Mass (approx.)
190 g (6.7 oz) excluding the power cord
Rechargeable battery pack (NP-FM30)
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
5.0 Wh (700 mAh)
Dimensions (approx.)
38.2 
× 20.5 × 55.6 mm 
(1 9/16 
× 1 3/16 × 2 1/4 in.) (w/h/d)
Mass (approx.)
65 g (2.3 oz)
Operating temperature
0
° C to 40° C (32° F to 104° F)
Type
Lithium ion
Design and specifications are subject to change 
without notice.
DCR-TRV360/TRV361/TRV460:
DCR-TRV360/TRV361/TRV460:
DCR-TRV460E/TRV461E:
SP: Approx. 28.70 mm/s
LP: Approx. 19.13 mm/s
DCR-TRV460E/TRV461E:
(using 120 min. Hi8/Digital8 video cassette)
DCR-TRV460E/TRV461E:
DCR-TRV360/TRV361/TRV460:
(using 90 min. Hi8/Digital8 video cassette)
(using 120 min. Hi8/Digital8 video cassette)
DCR-TRV460E/TRV461E:
DCR-TRV360/TRV361/TRV460:
(using 90 min. Hi8/Digital8 video cassette)
DCR-TRV360/TRV361/TRV460:
DCR-TRV460E/TRV461E:
Gross: Approx. 540 000 pixels
DCR-TRV460E/TRV461E: 0.3 Vp-p
DCR-TRV360/TRV361/TRV460: 0.286 Vp-p
Memory Stick  8MB (1)
AC Adaptor (1)
Power cord (1)
Lens cap (1)
Shoulder strap (1)
Wireless Remote commander RMT-831 (1)
A/V connecting cable (1)
USB cable (1)
Rechargeable battery pack NP-FM30 (1)
CD-ROM  SPVD-012 USB Driver  (1)
21-pin adaptor (1)
(AEP, UK, EE)
Camera Operations Guide (1)
Computer Applications Guide (1)
(DCR-TRV361/TRV461E)
SERIES
TM
— 3 —
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0
 OR DOTTED LINE WITH
MARK 
0
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 
0
 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
Table for differences of function
Model
DCR-TRV360
DCR-TRV361
DCR-TRV460
DCR-TRV460E
DCR-TRV461E
Destination
US
E
US, CND, E
AEP, UK, EE
E
NE, E, AUS
Color system
NTSC
NTSC
NTSC
PAL
PAL
Playback system
Digital8
Digital8
Hi8/8/Digital8
Hi8/8/Digital8
Hi8/8/Digital8
Mechanism deck
M2200
M2200
M2000
M2000
M2000
• Abbreviation
AUS : Australian model
CND : Canadian model
EE
: East European model
NE
: North European model
— 4 —
DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E
TABLE OF CONTENTS
1.
SERVICE NOTE
1-1.
Note for Repair ································································ 1-1
1-2.
Power Supply During Repairs ········································· 1-1
1-3.
To Take Out a Cassette when not Eject (Force Eject) ····· 1-2
1-4.
Self-diagnosis Function ··················································· 1-3
1-4-1. Self-diagnosis Function ··················································· 1-3
1-4-2. Self-diagnosis Display ····················································· 1-3
1-4-3. Self-diagnosis Code Table ··············································· 1-4
2.
DISASSEMBLY
2-1.
Flow Chart ······································································· 2-1
2-2.
Mechanism Deck Service Position ·································· 2-3
2-3.
LCD Service Position ······················································ 2-5
2-4.
Circuit Boards Location ·················································· 2-6
2-5.
Flexible Boards Location ················································ 2-7
3.
BLOCK DIAGRAMS
3-1.
Overall Block Diagram (1/6) ··········································· 3-1
3-2.
Overall Block Diagram (2/6) ··········································· 3-3
3-3.
Overall Block Diagram (3/6) ··········································· 3-5
3-4.
Overall Block Diagram (4/6) ··········································· 3-7
3-5.
Overall Block Diagram (5/6) ··········································· 3-9
3-6.
Overall Block Diagram (6/6) ········································· 3-11
3-7.
Power Block Diagram (1/3) ··········································· 3-13
3-8.
Power Block Diagram (2/3) ··········································· 3-15
3-9.
Power Block Diagram (3/3) ··········································· 3-17
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-1.
Frame Schematic Diagrams ············································· 4-1
4-2.
Schematic Diagrams ························································ 4-5
CD-472 (CCD IMAGER) ················································ 4-7
PD-205 (LCD DRIVER, BACKLIGHT DRIVE) ········· 4-45
SI-041 (STEADYSHOT, JACK) ··································· 4-47
FP-792 FLEXIBLE ······················································· 4-47
FP-228, FP-299, FP-300, FP-301, FP-302, FP-802
FLEXIBLE ···································································· 4-49
SS-5100, PR-5100 (CONTROL KEY BLOCK) ··········· 4-50
CF-5100 (CONTROL KEY BLOCK) ··························· 4-51
4-3.
Printed Wiring Boards ··················································· 4-55
CD-472 ·········································································· 4-57
PD-205 ··········································································· 4-63
SI-041, FP-792 FLEXIBLE ·········································· 4-65
FP-228, FP-299, FP-300, FP-301, FP-302, FP-802
FLEXIBLE ···································································· 4-67
4-5.
Mounted Parts Location ················································ 4-71
Section
Title
Page
Section
Title
Page
5.
REPAIR  PARTS  LIST
5-1.
Exploded Views ···························································· 5-2
5-1-1. Overall Assembly ·························································· 5-2
5-1-2. Front Panel Block ························································· 5-3
5-1-3. Lens Block ···································································· 5-4
5-1-4. LCD Block ···································································· 5-5
5-1-5. Cabinet R Block ···························································· 5-6
5-1-6. EVF Block ···································································· 5-7
5-1-7. Battery Panel Block ······················································ 5-8
5-1-8. MD Frame Block ·························································· 5-9
5-1-9. Cassette Compartment Assembly, Drum Assembly ··· 5-10
5-1-10. LS Chassis Block Assembly ······································· 5-11
5-1-11. Mechanical Chassis Block Assembly-1 ······················ 5-12
5-1-12. Mechanical Chassis Block Assembly-2 ······················ 5-13
5-2.
Electrical Parts List ····················································· 5-14
Page of 62
Display

Download Sony DCR-TRV360 / DCR-TRV361 / DCR-TRV460 / DCR-TRV460E / DCR-TRV461E (serv.man2) Service Manual (Repair Manual)

Here you can read online and download Sony DCR-TRV360 / DCR-TRV361 / DCR-TRV460 / DCR-TRV460E / DCR-TRV461E (serv.man2) Service Manual in PDF. DCR-TRV360 / DCR-TRV361 / DCR-TRV460 / DCR-TRV460E / DCR-TRV461E (serv.man2) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DCR-TRV360 / DCR-TRV361 / DCR-TRV460 / DCR-TRV460E / DCR-TRV461E (serv.man2) Movie. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.