DCR-TRV345E, DCR-TRV350, DCR-TRV351, DCR-TRV355E, DCR-TRV356E (serv.man4) - Sony Movie Service Manual (repair manual). Page 8

6-5

For details of how remove the cabinet and boards, refer
to “2. DISASSEMBLY”.

When performing only the adjustments, the lens block
and boards need not be disassembled.

1) Connect the equipment for adjustments according to Fig. 6-1-

3.

As removing the cabinet (R) (removing the VC-305 board
CN1007) means removing the lithium 3V power supply
(CF-3000 block BT001), data such as date, time, user-
set menus will be lost. After completing adjustments,
reset these data. If the cabinet (R) has been removed, the
self-diagnosis data, data on history of use (total drum
rotation time, etc. ) will be lost. Before removing, note
down the self-diagnosis data (data of page: 7, address:
B0 to C6) and data on history use (data of page: 7, ad-
dress: A7 to A9 and C8 to CF). (Refer to “SELF-DIAG-
NOSIS FUNCTION” for the self-diagnosis data, and to
“6-4. Service Mode” for the data on the history use)

Setting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press

the PAUSE button of the adjustment remote com-
mander.
The above procedure will enable the camera power
to be turned on with the power switch (SS-3000 block)
removed. After completing adjustments, be sure to
exit the “Forced Camera Power ON Mode”.

Exiting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press

the PAUSE button of the adjustment remote com-
mander.

3) Select page: 0, address: 01, and set data: 00.

Front of the lens

1.5 m

Pattern box