Read Sony DCR-TRV30E Service Manual online
— 16 —
2-8.
CONTROL SWITCH BLOCK (FK-1800), CONTROL SWITCH BLOCK (PS-1800)
2
Zoom cover
qg
Tapping
screw
(M1.7
(M1.7
×
3.5)
5
Screw
(M1.7
×
2.5), p
7
Harness
retainer
qd
Tapping
screw
(M1.7
(M1.7
×
3.5)
0
Four tapping
screws
(M1.7
(M1.7
×
3.5)
qs
CS frame assembly
qh
Control switch block
(PS-1800)
qf
Control switch block
(FK-1800)
4
Grip cover
(Note)
1
Two claws
qa
Claw
Caution: High voltage
9
Tapping
screw
(M1.7
(M1.7
×
5)
3
Two tapping
screws
(M1.7
(M1.7
×
5)
6
Tapping
screw
(M1.7
(M1.7
×
5)
8
Tapping
screw (M1.7
×
3.5)
PRECAUTION DURING
INSTALLATION
INSTALLATION
To attach, align the switch
position as shown.
position as shown.
Flash unit
Power supply
capacitor
ROUTING OF THE HARNESS AND FLEXIBLE
AROUND THE HARNESS RETAINER.
AROUND THE HARNESS RETAINER.
Note:
The power supply capacitor of the flash unit is charged to the high tension voltage as high as 300 V at a maximum. You will get
electrical shock when you touch the terminal of the charged capacitor. The charged potential remains even after the main power
of the machine is turned off. Discharge the remaining power in the capacitor referring to Service Note (page 6).
of the machine is turned off. Discharge the remaining power in the capacitor referring to Service Note (page 6).
Harness retainer
Engage here.
Rote the extra length this side.
Two harnesses must be aligned flat along this
surface and must not be overlapped.
surface and must not be overlapped.
Click on the first or last page to see other DCR-TRV30E service manuals if exist.