DCR-TRV24E, DCR-TRV25E, DCR-TRV27E (serv.man2) - Sony Movie Service Manual (repair manual). Page 24

2-15

VA-117

VC-281

To check the VTR section, set the VTR to the “Forced VTR power ON” mode.
Operate the VTR functions using the adjustment remote commander (with the HOLD switch set in the OFF position).

1)  Select page: 0, address: 01, and set data: 01.
2)  Select page: 0, address: 10, and set data: 00.
3)  Select page: D, address: 10, set data: 02, and 

press the PAUSE button of the adjustment remote
commander.

1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 00, and press 
     the PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.

To eject the cassette, connect Pin 

wd

 of the

 CN1501 on the VC-281 board to Pin 

w;

(GND) of the CN1501 on the VC-281 board
for a second.
Note: Be sure to enter the "Forced VTR 
          power ON" mode when ejecting the
          cassette.

CN1501

2

24

23

1

CPC-8 jig
(J-6082-388-A)

AC power
adaptor 

AC IN

Adjustment remote
commander (RM-95)

Battery terminal
board (6P)

Extension cable (100P)
(J-6082-352-A)

VA-117 board

VC-281 board

JK-217 board

JK-218 board

Mechanism deck