Read Sony DCR-TRV238E / DCR-TRV239E (serv.man3) Service Manual online
— 21 —
DCR-TRV238E/TRV239E
2-19. HINGE SECTION
6
Four tapping
screws (B2
×
5)
3
Two tapping
screws (B2
×
5)
1
Tape (A)
5
Ornamental ring (2) assembly
4
Two claws
2
Harness
(PD-117) (6P)
REMOVING THE HINGE ASSEMBLY
2
FP-412 flexible
board (6P)
1
Harness
(PD-117)
(6, 20P)
(6, 20P)
2
Hinge
assembly
1
Harness
(PD-117)
6
FP-412 flexible board
4
Two screws
(M1.7
×
2.5), p
2
Hinge cover (C)
3
Hinge
cover (M)
1
Two claws
5
Claw
A
Remove the Harness (PD-117)
in the direction of the arrow
in the direction of the arrow
A
.
Then bend the harness so that it is laid
along with the connector.
along with the connector.
7
Hinge
assembly
7
For removing the LCD unit
(See page 11)
Tape (A)
Harness
(PD-117)
(PD-117)
Routing of the harness (PD-117) .
Click on the first or last page to see other DCR-TRV238E / DCR-TRV239E (serv.man3) service manuals if exist.