Read Sony DCR-TRV10 / DCR-TRV10E / DCR-TRV8 / DCR-TRV8E (serv.man8) Service Manual online
SERVICE MANUAL
CORRECTION-1
Correct your service manual as shown below.
(99-018, EVB01977)
DCR-TRV8/TRV8E/TRV10/TRV10E
RMT-808/809/811/812
US Model
Canadian Model
Korea Model
DCR-TRV8/TRV10
AEP Model
UK Model
Australian Model
Chinese Model
DCR-TRV8E/TRV10E
E Model
Hong Kong Model
DCR-TRV8/TRV8E/TRV10/TRV10E
Tourist Model
DCR-TRV10/TRV10E
1. Part number suffix of PD-110 board is changed to -12.... (Page 1, 2)
2. Addition of extension cable for adjustment .......................... (Page 3)
3. TG7 guide of the D mechanism is changed. ....................... (Page 4)
4. Parts information correction ................................................. (Page 4)
2. Addition of extension cable for adjustment .......................... (Page 3)
3. TG7 guide of the D mechanism is changed. ....................... (Page 4)
4. Parts information correction ................................................. (Page 4)
• Abbreviation
CND: Canadian model
HK : Hong Kong model
JE
HK : Hong Kong model
JE
: Tourist model
AUS : Australian model
CN : Chinese model
KR : Korea model
CN : Chinese model
KR : Korea model
Models
DCR-TRV8 : US
-TRV8 : CND
-TRV8 : E
-TRV8 : HK
-TRV8 : KR
-TRV8E : AEP
-TRV8E : UK
-TRV8E : AUS
-TRV8E : CN
-TRV8E : E
-TRV8E : HK
DCR-TRV10 : US
Serial Nos.
32101 and higher
A10500 and higher
23891 and higher
32001 and higher
36301 and higher
33001 and higher
33501 and higher
32901 and higher
33301 and higher
32800 and higher
33701 and higher
165751 and higher
Models
DCR-TRV10 : CND
-TRV10 : KR
-TRV10 : E
-TRV10 : HK
-TRV10 : JE
-TRV10E : AEP
-TRV10E : UK
-TRV10E : AUS
-TRV10E : CN
-TRV10E : E
-TRV10E : HK
-TRV10E : JE
Serial Nos.
10501 and higher
–
165601 and higher
195301 and higher
195201 and higher
43151 and higher
32501 and higher
23101 and higher
31479 and higher
33701 and higher
29093 and higher
34001 and higher
Applicable serial Nos. (for the item 1.)
1999. 10
— 2 —
:
Added portion.
:
Changed portion.
Page
4-78
4-80
5-11
6-19
Changed contents
41
42
43 (Note)
44
45
46
Fixed data-2
(Modified data, copy the data built in
the same model.)
Fixed data-1
(Initialized data)
Address
Remark
Initial value
NTSC PAL
3. D Page Table
Note :
Read the data of the same address on the same page from
the other models that have the PD-110 board of the same
suffix No.
Set the read out data into the board under repair.
the other models that have the PD-110 board of the same
suffix No.
Set the read out data into the board under repair.
PD-110 BOARD PRINTED WIRING BOARD
<LOCATION A-3>
PD-110 BOARD (1/2)
<LOCATION J-11>
Note : Replace both parts D5900 and IC5901 together simultaneously
when either one of them is replaced.
D5900
MA728
6-2. ELECTRICAL PARTS LIST
6-2. ELECTRICAL PARTS LIST
PD-110 BOARD, COMPLETE
**********************
< DIODE >
**********************
< DIODE >
< IC >
IC5901
8-759-431-95 IC S-81230SGUP-DQB-T1
Ref. No.
Part No.
Description
Remarks
Ref. No.
Part No.
Description
Remarks
PD-110 BOARD, COMPLETE
**********************
< DIODE >
**********************
< DIODE >
D5900
8-719-421-27 DIODE MA728
(Note)
< IC >
IC5901
8-759-493-53 IC S-81233SGUP-DQB-T1
(Note)
Note : Replace both parts D5900 and IC5901 together simulta-
neously when either one of them is replaced.
— 3 —
:
Added portion.
:
Changed portion.
Page
5-4
5-20
Changed contents
4. Flange Back Adjustment
(Using Minipattern Box)
(Using Minipattern Box)
Preparation for adjustment
The minipattern box is installed as shown in the following figure.
The minipattern box is installed as shown in the following figure.
Note :
The attachment lenses are not used.
Specified voltage:
The specified voltage varies according to the
minipattern box, so adjust the power supply
output voltage to the specified voltage written
on the sheet which is supplied with the
minipattern box.
minipattern box, so adjust the power supply
output voltage to the specified voltage written
on the sheet which is supplied with the
minipattern box.
Adjusting method:
1)
1)
Install the minipattern box so that the distance between it and
the front of the lens of the camcorder is less than 3 cm.
the front of the lens of the camcorder is less than 3 cm.
2)
Make the height of the minipattern box and the camcorder equal.
3)
Check that the output voltage of the regulated power supply is
the specified voltage ± 0.01Vdc.
the specified voltage ± 0.01Vdc.
Minipattern box
Below 3 cm
Camcorder
Camera
table
Red (+)
Black (–)
Yellow (SENS +)
White (SENS –)
Black (GND)
Need not connected
Regulated power supply
Output voltage : Specified voltage
±
0.01Vdc
Output current : more than 3.5A
Ref. No.
J-9
J-10
J-11
J-12
J-13
J-14
Name
Extension cable (80P, 0.4mm)
IR receiver jig
Mini pattern box
Camera table
Extension cable (50P, 0.5mm)
Extension cable (60P, 0.5mm)
Parts Code
J-6082-395-B
J-6082-383-A
J-6082-353-B
J-6082-384-A
J-6082-445-A
J-6082-446-A
Usage
For extension between the DD-123 board (CN3202) and
the VC-217 board (CN2902)
the VC-217 board (CN2902)
For adjusting the IR transmitter
For adjusting the flange back
For adjusting the flange back
For extension between the VC-217 board (CN2901) and
the FP-83 flexible board (CN002)
the FP-83 flexible board (CN002)
For extension between the VC-217 board (CN2903) and
the JK-170 board (CN400)
the JK-170 board (CN400)
5-1. CAMERA SECTION ADJUSTMENT
1-1.
PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)
1-1-1.
List of Service Tools
J-13, J-14
DCR-TRV8/TRV8E/TRV10/TRV10E
— 4 —
Sony Corporation
Personal VIDEO Products Company
99J1634-1
Printed in Japan ©1999.10
Published by Safety & Service Engineering Dept.
9-974-161-91
SECTION 6. REPAIR PARTS LIST
6-1-3. LCD PANEL SECTION
Page
6-3
6-8
6-31
Ref. No.
Part No.
Description
Remarks
Ref. No.
Part No.
Description
Remarks
INCORRECT
CORRECT
778
3-748-777-02 TG7
779
3-964-614-01 FLANGE, TG7 LOWER
H001
8-719-003-37 ELEMENT, HALL HW-105C
778
3-057-819-01 TG7 (INCLUDING 779)
H001
8-719-033-37 ELEMENT, HALL HW-105C
776
778
769
751
771
772
771
773
785
780
779
777
SECTION 6. REPAIR PARTS LIST
6-1-3. LCD PANEL SECTION
DELETE
106
A-7073-971-A PD-110 BOARD COMPLETE (10/10E:E)
106
A-7074-021-A PD-110 BOARD COMPLETE (8/8E)
106
A-7074-033-A PD-110 BOARD COMPLETE
(10E:AEP,UK,HK,JE,CN,AUS)
LCD901 A-7094-390-A INDICATION LCD BLOCK ASSY
LCD902 1-803-032-21 MODULE, CRYSTAL INDICATION (8/8E)
LCD902 1-803-033-21 MODULE, CRYSTAL INDICATION (10/10E)
6-1-8. LS CHASSIS BLOCK SECTION
6-1-8. LS CHASSIS BLOCK SECTION
Ref. No.
Part No.
Description
Remarks
Ref. No.
Part No.
Description
Remarks
106
A-7073-971-A PD-110(SH) BOARD COMPLETE (10)
106
A-7074-021-A PD-110(CL) BOARD COMPLETE (8/8E)
106
A-7074-033-A PD-110(CH) BOARD COMPLETE (10E)
LCD902 A-7094-390-A INDICATION LCD BLOCK ASSY
LCD901 1-803-032-21 MODULE, CRYSTAL INDICATION (8/8E)
LCD901 1-803-033-21 MODULE, CRYSTAL INDICATION (10E)
LCD901 1-803-274-21 MODULE, CRYSTAL INDICATION (10)
! Fig C
1-467-512-41 ADAPTOR, AC (AC-MZ60)(10E:UK)
! Fig C
1-467-512-42 ADAPTOR, AC (AC-PT1)(10E:UK)
:
Added portion.
:
Changed portion.
:
Deleted portion.
776
778
769
751
771
772
771
773
785
780
777
