DCR-TR8000E, DCR-TR8100E, DCR-TRV120, DCR-TRV120E, DCR-TRV120P, DCR-TRV125E (serv.man3) - Sony Movie Service Manual (repair manual). Page 10

Read Sony DCR-TR8000E / DCR-TR8100E / DCR-TRV120 / DCR-TRV120E / DCR-TRV120P / DCR-TRV125E (serv.man3) Service Manual online

– 14 –
DCR-TRV120/TRV120E/TRV120P/TRV125E/
TR8000E/TR8100E
5. Contrast Adjustment (PD-133 board)
Set the level of the VIDEO signal for driving the LCD to the specified
value. If deviated, the screen image will be blackish or saturated
(whitish).
Mode
Camera
Subject
Arbitrary
Measurement Point
Pin 3 of CN5502 (VG)
 External trigger : Pin 4 of CN5502
 (PSIG)
Measuring Instrument
Oscilloscope
Adjustment Page
D
Adjustment Address
AA
Specified Value
A=2.63 
±
 0.07 Vp-p
4. RGB AMP Adjustment (PD-133 board)
Set the D range of the RGB driver used to drive the LCD to the
specified value. If deviated, the LCD screen will become blackish
or saturated (whitish).
Mode
Camera
Subject
Arbitrary
Measurement Point
Pin 3 of CN5502 (VG)
 External trigger : Pin 4 of CN5502
 (PSIG)
Measuring Instrument
Oscilloscope
Adjustment Page
D
Adjustment Address
A5
Specified Value
A=7.45 
±
 0.05 Vp-p
Adjusting method:
Order Page Address Data
Procedure
1
0
01
01
2
D
A5
Change the data and set the
voltage (A) to the specified value.
(The data should be “00” to “FF”)
3
D
A5
Press PAUSE button.
4
0
01
00
Adjusting method:
Order Page Address Data
Procedure
1
0
01
01
2
D
AA
Change the data and set the
voltage (A) to the specified value.
(The data should be “00” to “7F”)
3
D
AA
Press PAUSE button.
4
0
01
00
Fig. 5-1-25
Fig. 5-1-24
A
A: Between the reversed waveform pedestal and
non-reversed waveform pedestal
2H 
Pedestal
Pedestal
A
A: Between the pedestal (0 IRE) and 100 IRE
2H 
100 IRE
Pedestal
Page of 16
Display

Click on the first or last page to see other DCR-TR8000E / DCR-TR8100E / DCR-TRV120 / DCR-TRV120E / DCR-TRV120P / DCR-TRV125E (serv.man3) service manuals if exist.