Read Sony DCR-TR7000E / DCR-TR7100E / DCR-TRV110E / DCR-TRV210E / DCR-TRV310E Service Manual online
— 7 —
E
E
E
E
Block
Function
6
1
6
1
6
2
6
2
Detailed
Code
0
0
1
0
0
0
0
1
Symptom/State
Difficult to adjust focus
(Cannot initialize focus.)
(Cannot initialize focus.)
Zoom operations fault
(Cannot initialize zoom lens.)
(Cannot initialize zoom lens.)
Handshake correction function does not
work well. (With pitch angular velocity
sensor output stopped.)
work well. (With pitch angular velocity
sensor output stopped.)
Handshake correction function does not
work well. (With yaw angular velocity
sensor output stopped.)
work well. (With yaw angular velocity
sensor output stopped.)
Self-diagnosis Code
Repaired by:
Correction
Inspect the lens block focus reset sensor (Pin
!™ of CN551 of VC-
213 board) when focusing is performed when the control dial is
rotated in the focus manual mode and the focus motor drive circuit
(IC551 of VC-213 board) when the focusing is not performed.
rotated in the focus manual mode and the focus motor drive circuit
(IC551 of VC-213 board) when the focusing is not performed.
Note:
Use the remote commander RM-95 only for the model without the
focus dial.
Inspect the lens block zoom reset sensor (Pin
!¢ of CN551 of VC-
214 board) when zooming is performed when the zoom lens is
operated and the zoom motor drive circuit (IC551 of VC-213 board)
when zooming is not performed.
operated and the zoom motor drive circuit (IC551 of VC-213 board)
when zooming is not performed.
Inspect pitch angular velocity sensor (SE651 of SE-86/87/89
board) peripheral circuits.
board) peripheral circuits.
Inspect yaw angular velocity sensor (SE652 of SE-86/87/89
board) peripheral circuits.
board) peripheral circuits.
Click on the first or last page to see other DCR-TR7000E / DCR-TR7100E / DCR-TRV110E / DCR-TRV210E / DCR-TRV310E service manuals if exist.