Read Sony DCR-TR7000E / DCR-TR7100E / DCR-TRV110E / DCR-TRV210E / DCR-TRV310E Service Manual online
— 2 —
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
!
OR DOTTED LINE WITH
MARK
!
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
• Difference table of fanction
Model
Viewfinder
LCD (Size)
DCR-TRV110E
B/W EVF
2.5
DCR-TRV210E
B/W EVF
3
DCR-TRV310E
B/W EVF
3.5
DCR-TRV7000E
Color EVF
—
DCR-TRV7100E
Color EVF
—
Mass (approx.)
DCR-TRV110E:
890 g (1 lb 15 oz)
DCR-TRV210E:
930 g (2 lb)
TRV310E:
960 g (2 lb 1 oz)
DCR-TR7000E/TR7100E:
790 g (1 lb 11 oz)
excluding the battery pack, lithium
battery, cassette and shoulder strap
DCR-TRV110E:
1 kg (2 lb 3 oz)
DCR-TRV210E/TRV310E:
1.1 kg (2 lb 6 oz)
DCR-TR7000E:
930 g (2 lb)
including the battery pack
NP-F330, lithium battery CR2025,
90 min. cassette and shoulder strap
DCR-TR7100E:
950 g (2 lb 1 oz)
including the battery pack
NP-F550, lithium battery CR2025,
90 min. cassette and shoulder strap
890 g (1 lb 15 oz)
DCR-TRV210E:
930 g (2 lb)
TRV310E:
960 g (2 lb 1 oz)
DCR-TR7000E/TR7100E:
790 g (1 lb 11 oz)
excluding the battery pack, lithium
battery, cassette and shoulder strap
DCR-TRV110E:
1 kg (2 lb 3 oz)
DCR-TRV210E/TRV310E:
1.1 kg (2 lb 6 oz)
DCR-TR7000E:
930 g (2 lb)
including the battery pack
NP-F330, lithium battery CR2025,
90 min. cassette and shoulder strap
DCR-TR7100E:
950 g (2 lb 1 oz)
including the battery pack
NP-F550, lithium battery CR2025,
90 min. cassette and shoulder strap
Supplied accessories
See page 8 .
AC power adaptor
Power requirements
100 - 240 V AC, 50/60 Hz
Power consumption
23 W
Output voltage
DC OUT: 8.4 V, 1.5 A in operating
mode
mode
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Dimensions (approx.)
125
×
39
×
62 mm
(5
×
1 9/16
×
2 1/2 in.) (w/h/d)
excluding projecting parts
Mass (approx.)
280 g (9.8 oz)
excluding power cord
excluding power cord
Cord length (approx.)
AC power cord: 2 m (6.6 feet)
Connecting cord: 1.6 m (5.2 feet)
Connecting cord: 1.6 m (5.2 feet)
Design and specifications are
subject to change without notice.
subject to change without notice.
Click on the first or last page to see other DCR-TR7000E / DCR-TR7100E / DCR-TRV110E / DCR-TRV210E / DCR-TRV310E service manuals if exist.