Read Sony DCR-SX45 / DCR-SX45E / DCR-SX65 / DCR-SX65E / DCR-SX85 / DCR-SX85E (serv.man2) Service Manual online
DCR-SX45/SX45E/SX65/SX65E/SX85/SX85E_L2
3-1
3. ASSEMBLY
Assembly-1: Installation Cautions of the USB Harness and the
DC Jack Harness.
DC Jack Harness
USB Harness
MS-453 Board
Libs
Pass the DC Jack harness in the three libs.
Don't crossover the USB harness and the MS-453 board.
Don't crossover the USB harness and the MS-453 board.
Assembly-2: Installation Cautions of Shield Sheet (UA).
GND Harness
Other Harnesses
Sheild Sheet (UA)
Conductive Fabric Tape
Attach the each shield sheets (UA) to the GND harness and the
other harnesses.
other harnesses.
Assembly-3: Precaution Mounting method of Diode (D4002)
(LED video light)
DD-430
DD-430
DD-430 Board
Diode (NSPL500DS)
Diode (NSPL500DS)
Precaution the polarity.
5.5mm
11.5mm
Bend
Cut
Assembly-4: How to distinguish the side of Optical Filter Block
facing to Lens Device.
• IR cut coating surface
The red coating is reflected.
• The other surface
The red coating is
not reflected.
not reflected.
• Side view
The red belt
is seen.
is seen.
Lens Device side
Lens Device side
Hold it with tweezers or the like.
Optical Filter Block
[IR Cut Coated Side]
[The Other Side]
The one side of the Optical Filter Block has treated with IR cut coating.
Mount the Optical Filter Block facing the IR cut coated side to the lens
device.Distinguish the IR cut coated side from the other byapplying the
fluorescent light to the Optical Filter Block in the dark place(cut off the
outside light).
Mount the Optical Filter Block facing the IR cut coated side to the lens
device.Distinguish the IR cut coated side from the other byapplying the
fluorescent light to the Optical Filter Block in the dark place(cut off the
outside light).
Assembly-5: Installation Cautions of the DC Jack Harness and
the FP-1312 Flexible Board.
DC Jack Harness
Jack Holder
(U (365))
(U (365))
Jack Holder
(O (365))
(O (365))
Route the DC jack harness and the FP-1312 flexible board.
FP-1312 Flexible
Board
Board
Lib
Assembly-6: The Method of attachment of FP-1308 Flexible
Board.
1
Fold dotted line parts of the FP-1308 flexible board
as shown in figure.
as shown in figure.
Valley fold
Valley fold
Mountain fold
Adhesive tape
Adhesive tape
Adhesive tape
Adhesive tape
FP-1308 Flexible Board
2
Insert the FP-1308 Flexible Board to the Hinge Cover
(U(365)) as shown in figure.
(U(365)) as shown in figure.
4
Insert the FP-1308 Flexible Board to the Hinge Cover
(U(365)) as shown in figure.
(U(365)) as shown in figure.
3
Roll the FP-1308 flexible board 2 times in
the hinge assy as shown in figure.
the hinge assy as shown in figure.
2 times
FP-1308 Flexible Board
FP-1308 Flexible
Board
Board
Hinge Cover
(U (365))
(U (365))
Hinge Cover
(O (365))
(O (365))
Click on the first or last page to see other DCR-SX45 / DCR-SX45E / DCR-SX65 / DCR-SX65E / DCR-SX85 / DCR-SX85E (serv.man2) service manuals if exist.