DCR-SR77E, DCR-SR87, DCR-SR87E (serv.man2) - Sony Movie Service Manual (repair manual). Page 2

Read Sony DCR-SR77E / DCR-SR87 / DCR-SR87E (serv.man2) Service Manual online

1-1
ENGLISH
JAPANESE
ENGLISH
JAPANESE
DCR-SR77E/SR87/SR87E_L2
1. SERVICE  NOTE
1-1. POWER  SUPPLY  DURING  REPAIRS
In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4 V), the power is shut off so
that the unit cannot operate.
These following method is available to prevent this.
Method:
Use the AC power adaptor (AC-L200C/L200D).
1-2. PRECAUTION  ON  REPLACING  THE  VC-554  BOARD
DESTINATION DATA
When you replace to the repairing board, the written destination data of repairing board also might be changed to original setting.
Start the Adjust Manual in the Adjust Station and execute the “DESTINATON DATA WRITE”.
RESTORE DATA
When you replace to the repairing board, get the data from the former one.
Start the Adjust Manual in the Adjust Station and perform “RESTORE DATA” to get the data.
The data getting for this model is as follows.
• USB SERIAL No.
USB SERIAL No.
The set is shipped with a unique ID (USB Serial No.) written in it.
This ID has not been written in a new board for service, and therefore it must be entered after the board replacement.
Start the Adjust Manual in the Adjust Station and execute the “USB SERIAL No. INPUT”.
1-3. USING  SERVICE  JIG
Connect the extension cable (J-6082-698-A) between CN1111 on the DA-044 board and CN1014 on the VC-554 board.
CN1111
CN1014
DA-044 board (side B)
VC-554 board (side B)
Extension cab
(J-6082-698-A)
le (100P)
Page of 73
Display

Click on the first or last page to see other DCR-SR77E / DCR-SR87 / DCR-SR87E (serv.man2) service manuals if exist.