Read Sony DCR-SR58E / DCR-SR68 / DCR-SR68E / DCR-SR78E / DCR-SR88 / DCR-SR88E (serv.man2) Service Manual online
DCR-SR58E/SR68/SR68E/SR78E/SR88/SR88E_L2
2-2
NOTE FOR REPAIR
• Make sure that the flat cable and flexible board are not cracked
of bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
• When remove a connector, don’t pull at wire of connector. It is
possible that a wire is snapped.
• When installing a connector, don’t press down at wire of con-
nector.
It is possible that a wire is snapped.
• Do not apply excessive load to the gilded flexible board.
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
Click on the first or last page to see other DCR-SR58E / DCR-SR68 / DCR-SR68E / DCR-SR78E / DCR-SR88 / DCR-SR88E (serv.man2) service manuals if exist.