DCR-SR58E, DCR-SR68, DCR-SR68E, DCR-SR78E, DCR-SR88, DCR-SR88E (serv.man2) - Sony Movie Service Manual (repair manual). Page 15

DCR-SR58E/SR68/SR68E/SR78E/SR88/SR88E_L2

3-1E

How to distinguish the side of Optical Filter
Block facing to Lens Device

• IR cut coating surface
  The red coating is reflected.

• The other surface
  The red coating is 
  not reflected.

• Side view
  The red belt
  is seen.

Lens Device side

Lens Device side

Hold it with tweezers or the like.

Optical Filter 
Block 

The one side of the Optical Filter Block has treated
with IR cut coating.
Mount the Optical Filter Block  facing the IR cut 
coated side to the lens device.
Distinguish the IR cut coated side from the other by
applying the fluorescent light to 
the Optical Filter Block in the dark place
(cut off the outside light).

Precaution Mounting method of D901
(LED video light)

Diode (NSPL500DS)

Precaution the polarity. 

5.7mm

11.5mm

Bend

Cut

DA-049 Board

The Method of attachment of FP-1239
Flexible Board

1 Fold dotted line parts of the FP-1239 flexible board
     as shown in figure.

Unite 
corners.

Valley fold

Valley fold

Mountain fold

Mountain fold

Adhesive part

Adhesive part

Adhesive part

Adhesive 
tape

FP-1239
Flexible
Board

2 Put FP-1239 Flexible Board on the Hinge Assy 
 

as shown in figure.

3 Install the flexible clamp in the hinge assy 
 

as shown in figure.

4 Install the hinge cover (M) and magnet.

Hinge Assy

Adhesive Part

Flexible clamp

Hinge Cover (M)

Put the marking side
together on the position
of figure.

Marking

Magnet

5 Install the hinge cover (C).

6 Roll the FP-1239 flexible board 2 times in
     the hinge assy as shown in figure.

Hinge Cover (C)

Claws

2 times