Read Sony DCR-SR50E / DCR-SR60 / DCR-SR60E / DCR-SR70E / DCR-SR80 / DCR-SR80E (serv.man3) Service Manual online
— 4 —
DCR-SR50E/SR60/SR60E/SR70E/SR80/SR80E_L1
1.
Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the LCD screen what to
do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
function starts working, and displays on the LCD screen what to
do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
SELF-DIAGNOSIS FUNCTION
1 1
3 1
C
Repaired by:
Refer to 3. Self-diagnosis Code Table .
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2Hz
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
H : Corrected by dealer
E : Corrected by service
engineer
LCD screen
C : 3 1 : 1 1
3.
Self-diagnosis Code Table
C
C
C
C
Block
Function
0
4
1
3
1
3
3
2
Detailed
Code
0
0
0
0
0
2
5
0
Symptom/State
Non-standard battery is used.
Disk is faulty.
Disk access error
Codec IC dose not return are reply
Self-diagnosis Code
Repaired b
y:
Correction
Use the InfoLITHIUM battery.
Remove the power source. Reconnect it again and operate your
camcorder again
camcorder again
Remove the power source. Reconnect it again and operate your
camcorder again
camcorder again
Remove the power source. Reconnect it again and operate your
camcorder again
camcorder again
2.
Self-diagnosis Display
When problems occur while the unit is operating, the counter of the
LCD screen shows a 4-digit display consisting of an alphabet and
numbers, which blinks at 3.2 Hz. This 5-character display indicates
the “repaired by:”, “block” in which the problem occurred, and
“detailed code” of the problem.
LCD screen shows a 4-digit display consisting of an alphabet and
numbers, which blinks at 3.2 Hz. This 5-character display indicates
the “repaired by:”, “block” in which the problem occurred, and
“detailed code” of the problem.
Click on the first or last page to see other DCR-SR50E / DCR-SR60 / DCR-SR60E / DCR-SR70E / DCR-SR80 / DCR-SR80E (serv.man3) service manuals if exist.