Read Sony DCR-SR37E / DCR-SR38E / DCR-SR47 / DCR-SR47E / DCR-SR48 / DCR-SR48E / DCR-SR57E / DCR-SR67 / DCR-SR67E (serv.man2) Service Manual online
1-2E
DCR-SR37E/SR38E/SR47/SR47E/
SR48/SR48E/SR57E/SR67/SR67E_L2
SR48/SR48E/SR57E/SR67/SR67E_L2
1 1
3 1
C
Repaired by:
Refer to “1-4-3. Self-diagnosis Code Table”.
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2 Hz
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
H : Corrected by dealer
E : Corrected by service
engineer
LCD screen
C : 3 1 : 1 1
1-4. SELF-DIAGNOSIS FUNCTION
1-4-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the LCD screen what to
do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
function starts working, and displays on the LCD screen what to
do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
1-4-2. Self-diagnosis Display
When problems occur while the unit is operating, the counter of the
LCD screen shows a 4-digit display consisting of an alphabet and
numbers, which blinks at 3.2 Hz. This 5-character display indicates
the “repaired by:”, “block” in which the problem occurred, and
“detailed code” of the problem.
LCD screen shows a 4-digit display consisting of an alphabet and
numbers, which blinks at 3.2 Hz. This 5-character display indicates
the “repaired by:”, “block” in which the problem occurred, and
“detailed code” of the problem.
1-4-3. Self-diagnosis Code Table
C
C
C
E
E
E
E
E
Block
Function
0
4
1
3
1
3
2
0
6
1
6
1
6
1
9
4
Detailed
Code
0
0
0
1
0
2
0
0
0
0
1
0
1
1
0
0
Symptom/State
Non-standard battery is used.
“Memory Stick Duo” is unformatted.
“Memory Stick Duo” is broken.
“Memory Stick Duo” is broken.
Disc access error
Flash memory data are rewritten.
Difficult to adjust focus
(Cannot initialize focus.)
(Cannot initialize focus.)
Zoom operations fault
(Cannot initialize zoom lens.)
(Cannot initialize zoom lens.)
The abnormalities in initialization of
the focus lens and the abnormalities in
initialization of the zoom lens occurred
simultaneously.
the focus lens and the abnormalities in
initialization of the zoom lens occurred
simultaneously.
Fault of writing to or erasing the flash
memory
memory
Self-diagnosis Code
Repaired b
y:
Correction
Use the InfoLITHIUM battery.
Format the “Memory Stick Duo”.
Insert a new “Memory Stick Duo”.
Insert a new “Memory Stick Duo”.
Remove the power source. Reconnect it again and operate your
camcorder again
camcorder again
Make flash memory data correct value. (Note 1)
Inspect the lens block focus reset sensor (pin 8 of CN5101 on
the VC-554 board) when focusing is performed when the focus
buttons of the touch panel are pressed in the focus manual mode,
and the focus motor drive circuit (IC5401 on the VC-554 board)
when the focusing is not performed.
the VC-554 board) when focusing is performed when the focus
buttons of the touch panel are pressed in the focus manual mode,
and the focus motor drive circuit (IC5401 on the VC-554 board)
when the focusing is not performed.
Inspect the lens block zoom reset sensor (pin 0 of CN5101 on
the VC-554 board) when zooming is performed when the zoom
lever is operated, and the zoom motor drive circuit (IC5401 on
the VC-554 board) when zooming is not performed.
the VC-554 board) when zooming is performed when the zoom
lever is operated, and the zoom motor drive circuit (IC5401 on
the VC-554 board) when zooming is not performed.
Check whether the flexible board of the lens is broken, and
check whether it is inserted imperfectly. If there is no problem in
the flexible board, inspect the focus/zoom motor drive circuit
(IC5401 on the VC-554 board).
check whether it is inserted imperfectly. If there is no problem in
the flexible board, inspect the focus/zoom motor drive circuit
(IC5401 on the VC-554 board).
Inspect the flash memory (IC7801 on the VC-554 board). (Note 1)
Note 1:
Start the Adjust Manual in the Adjust Station and refer to the “DESTINATON DATA WRITE”.
Click on the first or last page to see other DCR-SR37E / DCR-SR38E / DCR-SR47 / DCR-SR47E / DCR-SR48 / DCR-SR48E / DCR-SR57E / DCR-SR67 / DCR-SR67E (serv.man2) service manuals if exist.