Read Sony DCR-SR32E / DCR-SR33E / DCR-SR42 / DCR-SR42A / DCR-SR42E / DCR-SR52E / DCR-SR62 / DCR-SR62E / DCR-SR72E / DCR-SR82 / DCR-SR82C / DCR-SR82E (serv.man3) Service Manual online
— 6 —
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_L1
1.
Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts worki ng, and displays on LCD screen what to do.
This function consists of two display; self-diagnosis display and
service mode display.
Details of the self-diagnosis functions are provided in the Instruction
manual.
function starts worki ng, and displays on LCD screen what to do.
This function consists of two display; self-diagnosis display and
service mode display.
Details of the self-diagnosis functions are provided in the Instruction
manual.
2.
Self-diagnosis Display
When problems occur while the unit is operating, the counter of
LCD screen shows a 4-digit display consisting of an alphabet and
numbers, which blinks at 3.2 Hz. This 5-character display indicates
the “repaired by:”, “block” in which the problem occurred, and
“detailed code” of the problem.
LCD screen shows a 4-digit display consisting of an alphabet and
numbers, which blinks at 3.2 Hz. This 5-character display indicates
the “repaired by:”, “block” in which the problem occurred, and
“detailed code” of the problem.
SELF-DIAGNOSIS FUNCTION
1 1
3 1
C
Repaired by:
Refer to “3. Self-diagnosis Code Table”.
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2Hz
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
H : Corrected by dealer
E : Corrected by service
engineer
LCD screen
C : 3 1 : 1 1
3.
Self-diagnosis Code Table
C
C
C
C
Block
Function
0
4
1
3
1
3
3
2
Detailed
Code
0
0
0
1
0
2
6
0
Symptom/State
Non-standard battery is used.
Memory Stick Duo is unformatted.
Memory Stick Duo is broken.
Memory Stick Duo is broken.
Disc access error
Difficult to adjust focus
(Cannot initialize focus)
(Cannot initialize focus)
Self-diagnosis Code
Repaired b
y:
Correction
Use the InfoLITHIUM battery.
Format the Memory Stick Duo.
Insert a new Memory Stick Duo.
Insert a new Memory Stick Duo.
Remove the power source. Reconnect it again and operate your
camcorder again
camcorder again
Retry turn the power on by the power switch. If it does not
recover, check the focus reset sensor of lens block. If it is OK,
check the focus motor drive IC.
recover, check the focus reset sensor of lens block. If it is OK,
check the focus motor drive IC.
Click on the first or last page to see other DCR-SR32E / DCR-SR33E / DCR-SR42 / DCR-SR42A / DCR-SR42E / DCR-SR52E / DCR-SR62 / DCR-SR62E / DCR-SR72E / DCR-SR82 / DCR-SR82C / DCR-SR82E (serv.man3) service manuals if exist.