Read Sony DCR-SR210E / DCR-SR220 / DCR-SR220D / DCR-SR220E / HDR-SR10 / HDR-SR10D / HDR-SR10E (serv.man3) Service Manual online
6-11
DCR-SR210E/SR220/SR220D/SR220E/
HDR-SR10/SR10D/SR10E_ADJ
HDR-SR10/SR10D/SR10E_ADJ
Note:
During the execution of Factory Check, the LCD screen of
the camcorder becomes gray, and the ACCESS lamp be-
comes dark and light.
When the Factory Check finished, the LCD screen changes
as follows:
the camcorder becomes gray, and the ACCESS lamp be-
comes dark and light.
When the Factory Check finished, the LCD screen changes
as follows:
When Factory Check is OK: Camera image display
When Factory Check is NG: Blue display
When Factory Check is NG: Blue display
Is replacement HDD new one?
No
Reused HDD
Reused HDD
Yes
New HDD
New HDD
Turn off the power of camcorder.
Turning on the power of camcorder
will start automatic Factory Check.
Wait until Factory Check completed. (Note)
[EST. PROCESS TIME]
Default: 6 min.
Full:
Full:
40GB About 2 hour 36 min.
60GB About 3 hour 36 min.
120GB About 7 hour 15 min.
60GB About 3 hour 36 min.
120GB About 7 hour 15 min.
Replace the HDD.
Execte the
“SetFactoryCheckDefault_After2008.vbe”.
(Double-click the file.)
“SetFactoryCheckDefault_After2008.vbe”.
(Double-click the file.)
Wait until “JOB Success”
message is displayed.
(several seconds)
message is displayed.
(several seconds)
Wait until “JOB Success”
message is displayed.
(several seconds)
message is displayed.
(several seconds)
Wait until “JOB Success”
message is displayed.
(several seconds)
message is displayed.
(several seconds)
Execte the
“SetFactoryCheckFull_After2008.vbe”.
(Double-click the file.)
“SetFactoryCheckFull_After2008.vbe”.
(Double-click the file.)
Execte the
“ExecAfterFactoryCheck_2008.vbe”.
(Double-click the file.)
“ExecAfterFactoryCheck_2008.vbe”.
(Double-click the file.)
B
A
(See page 6-10)
(See page 6-10)
Click on the first or last page to see other DCR-SR210E / DCR-SR220 / DCR-SR220D / DCR-SR220E / HDR-SR10 / HDR-SR10D / HDR-SR10E (serv.man3) service manuals if exist.