Read Sony DCR-PJ5 / DCR-PJ5E / DCR-PJ6 / DCR-PJ6E (serv.man2) Service Manual online
DCR-PJ5/PJ5E_L2
3-1
3. ASSEMBLY
Assembly-1: Installation Cautions of the DC-IN Harness
Pass DC-IN harness in the three libs.
DC-IN harness
Cabinet (G(244))
Assy
Assy
DC-IN Harness
Claws
Libs
Assembly-2: Installation Cautions of Speaker Harness
Pass Speaker harness in the lib and attached the tape.
Speaker Harness
Tape (AS 1/2)
Lib
Assembly-3: How to distinguish the side of Optical Filter Block
facing to Lens Device
• IR cut coating surface
the red coating is reflected.
• The other surface
the red coating is
not reflected.
not reflected.
• Side view
the red belt
is seen.
is seen.
Lens Device side
Lens Device side
Hold it with tweezers or the like.
Optical Filter Block
[IR Cut Coated Side]
[The Other Side]
The one side of the Optical Filter Block has treated with IR cut coating.
Mount the Optical Filter Block facing IR cut coated side to the lens
device. Distinguish IR cut coated side from other by applying the
fluorescent light to the Optical Filter Block in dark place
(cut off outside light).
Mount the Optical Filter Block facing IR cut coated side to the lens
device. Distinguish IR cut coated side from other by applying the
fluorescent light to the Optical Filter Block in dark place
(cut off outside light).
Assembly-4: Precaution Mounting method of Diode (D1003) (LED
video light)
Diode (NSPL500DS)
Diode (NSPL500DS)
Precaution the polarity.
5.7mm
12.7mm
Bend
Cut
VC-648 Board
Anode
Kathode
Assembly-5: Installation Cautions of Mic Unit
Route the flexible board
as shown in the figure (image).
as shown in the figure (image).
Microphone holder
Pass the flexible board of
the mic unit under this lib.
the mic unit under this lib.
Assembly-6: The Method of attachment of FP-1480 Flexible
Board
1
Fold dotted line parts of the FP-1480 flexible board
as shown in figure.
as shown in figure.
Adhesive tape
Adhesive tape
Adhesive tape
Adhesive tape
Mountain fold
FP-1480 Flexible Board
Mountain fold
Valley fold
Valley fold
Valley fold
Mountain fold
2
Install the FP-1480 flexible board to the flexible clamp.
FP-1480 Flexible Board
Flexible Clamp
3
Put FP-1480 flexible board on the Hinge Assy
and install the hinge cover M (247) as shown in figure.
and install the hinge cover M (247) as shown in figure.
4
Roll the FP-1480 flexible board 2 times in
the hinge assy as shown in figure.
the hinge assy as shown in figure.
2 times
Hinge Cover M (247)
Hinge Assy
Click on the first or last page to see other DCR-PJ5 / DCR-PJ5E / DCR-PJ6 / DCR-PJ6E (serv.man2) service manuals if exist.