Read Sony DCR-PC6E / DCR-PC9E Service Manual online
— 2 —
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
Battery pack
NP-FM30
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
5.0 Wh (700 mAh)
Operating temperature
0
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
5.0 Wh (700 mAh)
Operating temperature
0
°
C to 40
°
C (32
°
F to 104
°
F)
Dimensions (approx.)
38.2
38.2
×
20.5
×
55.6 mm
(1 9/16
×
13/16
×
2 1/4 in.)
(w/h/d)
Mass (approx.)
65 g (2.3 oz)
Type
Lithium ion
Mass (approx.)
65 g (2.3 oz)
Type
Lithium ion
“Memory Stick”
(DCR-PC9E only)
(DCR-PC9E only)
Memory
Flash memory
4MB: MSA-4A
Operating voltage
2.7-3.6V
Power consumption
Approx. 45mA in the operating
mode
Approx. 130
Flash memory
4MB: MSA-4A
Operating voltage
2.7-3.6V
Power consumption
Approx. 45mA in the operating
mode
Approx. 130
µ
A in the standby
mode
Dimensions (approx.)
50
Dimensions (approx.)
50
×
2.8
×
21.5 mm
(2
×
1/8
×
7/8 in.) (w/h/d)
Mass (approx.)
4 g (0.14 oz)
4 g (0.14 oz)
Design and specifications are
subject to change without notice.
subject to change without notice.
DCR-PC6E
✕
✕
✕
✕
✕
DCR-PC9E
a
a
a
a
Table for difference of functions
Model
Memory stick
VCR Rec mode
DV IN/OUT
DIGITAL IN/OUT (USB)
Remark
a: with FP-347 flexible
a: with REC button
a: with IN/OUT
✕: with OUT
a: with IN/OUT
✕: with OUT
a: with REC button
a: with IN/OUT
✕: with OUT
a: with IN/OUT
✕: with OUT
Click on the first or last page to see other DCR-PC6E / DCR-PC9E service manuals if exist.