Read Sony DCR-PC330 / DCR-PC330E (serv.man2) Service Manual online
1-3
DCR-PC330/PC330E
5.
NOTES ON HANDLING THE LASER DIODE [LASER UNIT (D7609 of FP-706 flexible)]
The laser diode may suffer electrostatic breakdown because of the potential difference generated by the charged electrostatic load, etc. on
clothing and the human body.
During repair, pay attention to electrostatic breakdown and also use the procedure in the printed matter which is included in the repair parts.
The flexible board is easily damaged and should be handled with care.
clothing and the human body.
During repair, pay attention to electrostatic breakdown and also use the procedure in the printed matter which is included in the repair parts.
The flexible board is easily damaged and should be handled with care.
5-1.
Soldering Conditions of Laser Unit (D7609)
Temperature of
Less than 350
°
C
the Soldering Iron
Time to Solder
3 seconds
Interval to Solder
Next terminal is soldered after
waiting for 1 second
waiting for 1 second
Note:
Adjustment is needed when laser unit (D7609) is replaced. Refer
to “24. AF Laser Output Adjustment”, “25. AF Laser Axis Check
(1)” and “26. AF Laser Axis Check (2)” of SERVICE MANUAL,
ADJ (987627251.pdf).
to “24. AF Laser Output Adjustment”, “25. AF Laser Axis Check
(1)” and “26. AF Laser Axis Check (2)” of SERVICE MANUAL,
ADJ (987627251.pdf).
Laser Unit (D7609)
Click on the first or last page to see other DCR-PC330 / DCR-PC330E (serv.man2) service manuals if exist.