DCR-PC115E, DCR-PC120E - Sony Movie Service Manual (repair manual). Page 12

— 12 —

NOTE: Follow the disassembly procedure in the numerical order given.

ON

OFF

When installing the Cabinet (L) section to the Cabinet (R) section 
and to the VTR complete, install it while the "Night-Shot switch 
outside the Cabinet (L) section" and "Night-Shot switch on top of 
the Lens Device" are facing upward.

1

 Screw 

     (M1.7 

×

 2.5), 

     lock ace, p2

3

 HS 

Cabinet

2

 Two claws

4

 Three screws 

     (M1.7 

×

 2.5), 

     lock ace, p2

5

 Jack ornamental 

     cover assembly

Jack ornamental 
cover assembly

Lens Device

Night-Shot switch on top of 
the Lens Device

Night-Shot switch outside the
Cabinet (L) section

3

 Two screws 

     (M1.7 

×

 4), 

     lock ace, p2

2

 Two screws 

     (M1.7 

×

 2.5), 

     lock ace, p2

4

 Screw 

     (M1.7 

×

 2.5), 

     lock ace, p2

1

 Screw 

     (M1.7 

×

 2.5), 

     lock ace, p2

6

 Cabinet (R) section, 

     VTR complete

5

 Control switch block 

     (FK-1850) (51P)

Flash unit (MC)

7

 Cabinet (L) section

Note: The power capacitor (C2010) of the flash unit is charged to the high tension voltage as high as 300 V at a maximum. 

You will get electrical shock when you touch the Flash unit (MC) mounted with the terminal of the charged capacitor. 
The charged potential remains even after the main power of the machine is turned off.
Discharge the remaining power in the capacitor referring to Service Note (page 6).

IR window 
assembly

Be careful that top of the Jack 
ornamental cover assembly does not 
hang over the IR window assembly.