Read Sony DCR-PC115 / DCR-PC115E / DCR-PC120BT / DCR-PC120E Service Manual online
5-3
DCR-PC115/PC115E/PC120BT/PC120E
Board
EEPROM
replacement
replacement
z
z
z
z
z
z
z
z
z
z
z
z
z
z
*1
z
z
z
*1
z
z
z
z
z
z
*1
z
z
*1
z
z
z
*1
z
z
z
z
z
z
z z z
z
z
z
z
*1
z
z
z
z
z
z
z z
z
z z
z
z z
z
z z
z
z z
z
z z
z
z z
z
z z
z
z z
z
z z
z
z z
z
z z
z
z z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
BT
-003 board
(COMPLEA
TE) Note3
CD-349 board
(COMPLEA
TE)
PD-148 board
(COMPLEA
TE)
VC-270 board
(COMPLEA
TE) Note4
VM-027 board
(COMPLEA
TE)
VC-270 board
IC451 (EEPR
OM)
VC-270 board
IC4701 (EEPR
OM)
VC-270 board
IC1406 (Flash memory)
Supporting
RadarWRadarW
RadarWRadarW
RadarW
• Adjusting items when replacing a board or EEPROM
When replacing a board or EEPROM, adjust the items indicated by
z
in the following table.
Adjustment
Section
Section
Initialization of
B,C,D,E,F,7,8
page data
Camera
Color EVF
LCD
System control
Servo & RF
Video
Mechanism
Adjustment
Initialization of C, D, 8 page data
Initialization of B page data
Initialization of E, F, 7 page data
40.5/54MHz origin oscillation adj.
MR adj.
HALL adj.
MAX GAIN adj.
CCD output 2ch matching adj.
Flange back adj.
Color reproduction adj.
AWB & LV standard data input
Auto white balance adj.
Mechanical shutter adj.
Steady shot check
Strobe light level adj.
Strobe white balance adj. & check
AF laser output adj.
AF laser optical axis adj.
VCO adj.
Backlight adj.
Bright adj.
Contrast adj.
White balance adj.
VCO adj.
Bright adj.
Black limit adj.
PSIG gray adj.
Contrast adj.
Center level adj.
V COM adj.
White balance adj.
Serial No. input
CAP FG duty adj.
Switching position adj.
AGC center level adj.
APC & AEQ adj.
PLL fo & LPF fo adj.
Chroma BPF fo adj.
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
Tape path adj.
Note2:
When the repair is finished, confirm the
following items.
following items.
1. Shoot the all black subject (Attach the lens cap and
shoot), and confirm that a vertical line is not
displayed in the center of the screen, and that there
is no difference in left-right brightness level of the
screen.
displayed in the center of the screen, and that there
is no difference in left-right brightness level of the
screen.
2. Shoot a subject of low light, and confirm that a
vertical line is not displayed in the center of the
screen, and that there is no difference in left-right
brightness level of the screen.
screen, and that there is no difference in left-right
brightness level of the screen.
3. Shoot a subject of normal light, and confirm that a
vertical line is not displayed in the center of the
screen, and that there is no difference in left-right
brightness level of the screen.
screen, and that there is no difference in left-right
brightness level of the screen.
When the above symptom occurs, perform the whole
process of “CCD Output 2ch Matching Adjustment”.
process of “CCD Output 2ch Matching Adjustment”.
Note3:
DCR-PC120BT/PC120E only.
When the BT-003 board is replaced, perform following
procedure and check that the “Self Information” is
displayed correctly.
procedure and check that the “Self Information” is
displayed correctly.
1) Set the POWER switch to MEMORY.
2) Press NETWORK button.
3) Select “Setup” of the network menu, then
2) Press NETWORK button.
3) Select “Setup” of the network menu, then
execute it.
4) Select “Bluetooth Setup”, then execute it.
5) Select “Info.”, then execute it.
6) Check that the following information is
5) Select “Info.”, then execute it.
6) Check that the following information is
displayed.
Name
SONY-PC120
Address
08:00:46:XX:XX:XX
Note4:
When replacing the VC-270 board, before
and after replacing, perform “Writing the
Network Default Setting Value” and initialize
the personal network information (Mail
address, bookmark etc.).
(DCR-PC120BT/PC120E only)
(Refer to “1-2-2. INITIALIZATION OF B
PAGE DATA”.)
and after replacing, perform “Writing the
Network Default Setting Value” and initialize
the personal network information (Mail
address, bookmark etc.).
(DCR-PC120BT/PC120E only)
(Refer to “1-2-2. INITIALIZATION OF B
PAGE DATA”.)
Note5:
When replacing the HI microprocessor, Input
data corresponding to the microprocessor’s
version to page: D, address: DC and DD.
(Refer to Table 5-1-3. “D PAGE DATA”.)
data corresponding to the microprocessor’s
version to page: D, address: DC and DD.
(Refer to Table 5-1-3. “D PAGE DATA”.)
*1: Perform this adjustment when replace the
CCD imager (IC101) and this board at the
same time.
same time.
Table. 5-1-1 (2).
Click on the first or last page to see other DCR-PC115 / DCR-PC115E / DCR-PC120BT / DCR-PC120E service manuals if exist.