DCR-PC106E, DCR-PC107E - Sony Movie Service Manual (repair manual)

dcr-pc106e, dcr-pc107e service manual
Model
DCR-PC106E DCR-PC107E
Pages
36
Size
6.17 MB
Type
PDF
Document
Service Manual
Brand
Device
Movie / LEVEL 3
File
dcr-pc106e-dcr-pc107e.pdf
Date

Read Sony DCR-PC106E / DCR-PC107E Service Manual online

SERVICE MANUAL
LEVEL
 
3
Link
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SCHEMATIC DIAGRAMS
Link
Revision History
Revision History
Ver 1.0  2004. 03
The information that is not described in this Service Manual is described
in the LEVEL 2 Service Manual.
When repairing, use this manual together with LEVEL 2 Service Manual.
• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (987670751.pdf).
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (987670741.pdf).
• Reference number search on printed wiring boards is available.
How to use
Acrobat Reader
How to use
Acrobat Reader
DIGITAL VIDEO CAMERA RECORDER
Contents of LEVEL 2 Service Manual
1. SERVICE NOTE
2. DISASSEMBLY
3. BLOCK DIAGRAMS
4. PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
5. REPAIR PARTS LIST
6. ADJUSTMENTS
OVERALL
POWER
CD-493, PD-213, LB-096, SE-140, CR-047,
FP-840, IR-052, MS-201, FP-926 BOARD
CONTROL KEY BLOCK (SB6300)
CONTROL SWITCH BLOCK
(SS6800, ZM6800)
FP-228, FP-467, FP-826, FP-841, FP-843,
FP-847 FLEXIBLE BOARD
EXPLODED VIEWS
ELECTRICAL PARTS LIST
DCR-PC106E/PC107E
RMT-830
Photo : DCR-PC107E
DCR-PC106E/PC107E
AEP Model
UK Model
DCR-PC106E
East European Model
DCR-PC107E
North European Model
Z (Z200) MECHANISM
— 2 —
DCR-PC106E/PC107E
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
°
C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°
C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 
0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
— 3 —
DCR-PC106E/PC107E
TABLE OF CONTENTS
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-2.
SCHEMATIC DIAGRAMS
• VC-350 (1/13) (TIMING GENERATOR, S/H, AGC,
ADC)
SCHEMATIC DIAGRAM ·········································· 4-23
• VC-350 (2/13) (LENS DRIVE)
SCHEMATIC DIAGRAM ·········································· 4-25
• VC-350 (3/13) (CAMERA/DV SIGNAL/AUDIO
PROCESSOR, DV INTERFACE, VIDEO OUT)
SCHEMATIC DIAGRAM ·········································· 4-27
• VC-350 (4/13) (REC PB/AMP)
SCHEMATIC DIAGRAM ·········································· 4-29
• VC-350 (5/13) (DRUM/CAPSTAN/LOADING
MOTOR DRIVE)
SCHEMATIC DIAGRAM ············································ 4-31
• VC-350  (6/13) (CAMERA/MECHCA CONTROL)
SCHEMATIC DIAGRAM ·········································· 4-33
• VC-350 (7/13) (HI CONTROL)
SCHEMATIC DIAGRAM ·········································· 4-35
• VC-350 (8/13) (RGB DRIVE)
SCHEMATIC DIAGRAM ·········································· 4-37
• VC-350 (9/13) (D/A-A/D CONV., MIC AMP,
AUDIO OUT)
SCHEMATIC DIAGRAM ·········································· 4-39
• VC-350 (10/13) (POWER IN, CHARGE)
SCHEMATIC DIAGRAM ·········································· 4-41
• VC-350 (11/13) (DC/DC CONVERTER)
SCHEMATIC DIAGRAM ·········································· 4-43
• VC-350 (12/13) (CONNECTOR-1)
SCHEMATIC DIAGRAM ·········································· 4-45
• VC-350 (13/13) (CONNECTOR-2)
SCHEMATIC DIAGRAM ·········································· 4-47
4-3.
PRINTED WIRING BOARDS
• VC-350 (TIMING GENERATOR, S/H, AGC, ADC,
LENS DRIVE, CAMERA/DV SIGNAL/AUDIO
PROCESSOR, DV INTERFACE, VIDEO OUT, REC/PB
AMP, DRUM/CAPSTAN/LOADING MOTOR DRIVE,
CAMERA/MECHA CONTROL, HI CONTROL, RGB
DRIVE, D/A-A/D CONV., MIC AMP, AUDIO OUT,
POWER IN, CHARGE, DC/DC CONVERTER,
CONNECTOR-1, CONNECTOR-2)
PRINTED WIRING BOARD ····································· 4-63
4-4.
MOUNTED PARTS LOCATION ································· 4-75
5.
REPAIR PARTS LIST
5-2.
ELECTRICAL PARTS LIST ········································ 5-16
DCR-PC106E/PC107E
VC-350 BOARD (7/13) 
(HI CONTROL)
VC-350 BOARD (13/13) 
(CONNECTOR-2)
VC-350 BOARD (9/13)
(D/A-A/D CONV., MIC AMP, AUDIO OUT)
VC-350 BOARD (3/13)
(CAMERA/DV SIGNAL/AUDIO PROCESSOR, DV INTERFACE, VIDEO OUT)
VC-350 BOARD (5/13)
(DRUM/CAPSTAN/LOADING MOTOR DRIVE)
VC-350 BOARD (6/13)
(CAMERA/MECHA CONTROL)
VC-350 BOARD (1/13)
(TIMING GENERATOR, S/H, AGC, ADC)
VC-350 BOARD (12/13) 
(CONNECTOR-1)
VC-350 BOARD (11/13) 
(DC/DC CONVERTER)
VC-350 BOARD (10/13) 
(POWER IN, CHARGE)
VC-350 BOARD (8/13) 
(RGB DRIVE)
VC-350 BOARD (2/13) 
(LENS DRIVE)
VC-350 BOARD (4/13) 
(REC/PB AMP)
VC-350 BOARD (7/13) 
(HI CONTROL)
VC-350 BOARD (13/13) 
(CONNECTOR-2)
VC-350 BOARD (9/13)
(D/A-A/D CONV., MIC AMP, AUDIO OUT)
VC-350 BOARD (3/13)
(CAMERA/DV SIGNAL/AUDIO PROCESSOR, DV INTERFACE, VIDEO OUT)
VC-350 BOARD (5/13)
(DRUM/CAPSTAN/LOADING MOTOR DRIVE)
VC-350 BOARD (6/13)
(CAMERA/MECHA CONTROL)
VC-350 BOARD (1/13)
(TIMING GENERATOR, S/H, AGC, ADC)
VC-350 BOARD (12/13) 
(CONNECTOR-1)
VC-350 BOARD (11/13) 
(DC/DC CONVERTER)
VC-350 BOARD (10/13) 
(POWER IN, CHARGE)
VC-350 BOARD (8/13) 
(RGB DRIVE)
VC-350 BOARD (2/13) 
(LENS DRIVE)
VC-350 BOARD (4/13) 
(REC/PB AMP)
COMMON NOTE FOR SCHEMATIC DIAGRAMS
COMMON NOTE FOR SCHEMATIC DIAGRAMS
4-2.  SCHEMATIC DIAGRAMS
Link
Link
Page of 36
Display

Download Sony DCR-PC106E / DCR-PC107E Service Manual (Repair Manual)

Here you can read online and download Sony DCR-PC106E / DCR-PC107E Service Manual in PDF. DCR-PC106E / DCR-PC107E service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DCR-PC106E / DCR-PC107E Movie. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.