DCR-PC106E, DCR-PC107E (serv.man4) - Sony Movie Service Manual (repair manual). Page 40

6-38

1. Initialization of 8, A, C, D, E, F, 1C, 1F Page Data
If the 8, A, C, D, E, F, 1C, 1F page data is erased due to some
reason, perform “1-2. INITIALIZATION OF 8, A, C, D, E, F, 1C,
1F PAGE DATA” of “6-1. CAMERA SECTION ADJUSTMENT”
Note: When reading or writing the 1C, 1F page data, select page: 0,
address: 10, and set data: 01, then select C or F page. The 1C or 1F
page can be chosen by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.

2. Touch Panel Adjustment
Adjust the calibration of the touch panel.

Mode

PLAY/EDIT (VTR stop)

Signal

Arbitrary

Adjustment Page

A

Adjustment Address

82 to 85

N o t e 1 :

This adjustment should be carried out upon completion of the LCD
system adjustments.

N o t e 2 :

Perform this adjustment with observing the screen from the front.

N o t e 3 :

Check that the LCD panel is not reverse mode.

N o t e 4 :

The data of page: 0, address: 10 must be “00”.

Adjusting method:
1)

Select page: 7, address: 05, and set data: 01.

2)

Using a stylus, push the center of “X” indicated in the part A.

3)

Using a stylus, push the center of “X” indicated in the part B.

4)

Using a stylus, push the center of “X” indicated in the part C.

5)

Select page: 7, address: 05, and check that the data is “00”.

Fig. 6-3-4.