DCR-IP45, DCR-IP45E, DCR-IP55, DCR-IP55E (serv.man2) - Sony Movie Service Manual (repair manual). Page 84

5-18

Before perform the camera system adjustments (except for “54MHz/
66MHz Origin Oscillation Adjustment”), check that the specified
values of “VIDEO SYSTEM ADJUSTMENTS” are satisfied.
And check that the data of page: 0, address: 10 is “00”. If not, set
data: 00 to this address.

Note: NTSC model: DCR- IP45/IP55

PAL model: DCR- IP45E/IP55E

Set the frequency of the clock for synchronization.
If deviated, the synchronization will be disrupted and the color will
become inconsistent.

Subject

Not required

Measurement Point

Pin qh of IC402

Measuring Instrument

Frequency counter

Adjustment Page

F

Adjustment Address

10

Specified Value

f=33000000 

± 166Hz (NTSC)

f=27000000 

± 135Hz (PAL)

Note: The data of page: 0, address: 10 must be “00”.

1

0

01

01

Set the data.

2

F

10

Change the data and set the
frequency (f) to the specified value.

3

F

10

Press PAUSE button.

4

0

01

00

Set the data.

Fig. 5-1-6.

IC402

1

12

13

24

25

36

37

48

VC-291 board