Read Sony DCR-IP210 / DCR-IP210E / DCR-IP220 / DCR-IP220E Service Manual online
SERVICE MANUAL
LEVEL
3
Link
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SCHEMATIC DIAGRAMS
Link
Revision History
Revision History
Ver 1.1 2003. 05
The information that is not described in this Service Manual is described
in the LEVEL 2 Service Manual.
When repairing, use this manual together with LEVEL 2 Service Manual.
in the LEVEL 2 Service Manual.
When repairing, use this manual together with LEVEL 2 Service Manual.
Contents of LEVEL 2 Service Manual
1. SERVICE NOTE
2. DISASSEMBLY
2. DISASSEMBLY
3. BLOCK DIAGRAMS
4. PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
5. REPAIR PARTS LIST
6. ADJUSTMENTS
OVERALL
POWER
BT-012, AN-025, LD-112, ST-076,
JK-234, SW-380, PK-067, PD-166,
VF-155, DC-098 BOARD,
FLASH UNIT (FL-2980),
CONTROL SWITCH BLOCK (SS-
2980, PW-2980), FP-538, FP-539,
FP-554, FP-541, FP-542 FLEXIBLE
POWER
BT-012, AN-025, LD-112, ST-076,
JK-234, SW-380, PK-067, PD-166,
VF-155, DC-098 BOARD,
FLASH UNIT (FL-2980),
CONTROL SWITCH BLOCK (SS-
2980, PW-2980), FP-538, FP-539,
FP-554, FP-541, FP-542 FLEXIBLE
EXPLODED VIEWS
ELECTRICAL PARTS LIST
ELECTRICAL PARTS LIST
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (992999541.pdf).
V MECHANISM
DCR-IP210/IP210E/
IP220/IP220E
RMT-817
US Model
Canadian Model
DCR-IP220
AEP Model
UK Model
Australian Model
DCR-IP220E
East European Model
DCR-IP210E/IP220E
Tourist Model
DCR-IP210/IP210E
E Model
DCR-IP210/IP210E/IP220/IP220E
Chinese Model
DCR-IP210E
Korea Model
DCR-IP210
Hong Kong Model
DCR-IP210/IP220E
DIGITAL VIDEO CAMERA RECORDER
Photo : DCR-IP220E
— 2 —
DCR-IP210/IP210E/IP220/IP220E
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40°C higher than
• Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
COVER
COVER
— 3 —
DCR-IP210/IP210E/IP220/IP220E
TABLE OF CONTENTS
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
4-2.
SCHEMATIC DIAGRAMS
• CD-406 (1/2) (CCD IMAGER)
SCHEMATIC DIAGRAM ···························· 4-25
• CD-406 (2/2) (TIMING GENERATER)
SCHEMATIC DIAGRAM ···························· 4-27
• DI-087 (1/4) (CONNECTOR), SW-380
(PANEL REVERSE)
SCHEMATIC DIAGRAM ···························· 4-29
• DI-087 (2/4) (TIMING GENERATER)
SCHEMATIC DIAGRAM ···························· 4-31
• DI-087 (3/4) (HI CONTROL)
SCHEMATIC DIAGRAM ···························· 4-33
• DI-087 (4/4) (DC-DC CONVERTER)
SCHEMATIC DIAGRAM ···························· 4-35
• VC-308 (1/21) (CAMERA A/D CONVERTER)
SCHEMATIC DIAGRAM ···························· 4-37
• VC-308 (2/21) (CAMERA PROCESS)
SCHEMATIC DIAGRAM ···························· 4-39
• VC-308 (3/21) (BASE BAND PROCESS)
SCHEMATIC DIAGRAM ···························· 4-41
• VC-308 (4/21) (MPEG MOVIE/DIGITAL STILL
PROCESS)
SCHEMATIC DIAGRAM ···························· 4-43
• VC-308 (5/21) (HI CONTROL, DIGITAL STILL
CONTROL)
SCHEMATIC DIAGRAM ···························· 4-45
• VC-308 (6/21) (FLASH MEMORY)
SCHEMATIC DIAGRAM ···························· 4-47
• VC-308 (7/21) (MPEG VIDEO PROCESS)
SCHEMATIC DIAGRAM ···························· 4-49
• VC-308 (8/21) (Q PROCESS)
SCHEMATIC DIAGRAM ···························· 4-51
• VC-308 (9/21) (I. LINK I/F)
SCHEMATIC DIAGRAM ···························· 4-53
• VC-308 (10/21) (MPEG AUDIO ENCODER/DE-
CODER)
SCHEMATIC DIAGRAM ···························· 4-55
• VC-308 (11/21) (HEAD AMP, PLL, A/D CONV)
SCHEMATIC DIAGRAM ···························· 4-57
• VC-308 (12/21) (VIDEO IN/OUT, VIDEO BUFFER)
SCHEMATIC DIAGRAM ···························· 4-59
• VC-308 (13/21) (USB I/F)
SCHEMATIC DIAGRAM ···························· 4-61
• VC-308 (14/21) (DRUM/CAPSTAN/LOADING
MOTOR DRIVE)
SCHEMATIC DIAGRAM ···························· 4-63
• VC-308 (15/21) (CAMERA CONTROL, EVR)
SCHEMATIC DIAGRAM ···························· 4-65
• VC-308 (16/21) (MECHA CONTROL, SIGNAL
PROCESS CONTROL)
SCHEMATIC DIAGRAM ···························· 4-67
• VC-308 (17/21) (AUDIO I/O)
SCHEMATIC DIAGRAM ···························· 4-69
• VC-308 (18/21) (MIC DRIVE, AF)
SCHEMATIC DIAGRAM ···························· 4-71
• VC-308 (19/21) (CONNECTOR)
SCHEMATIC DIAGRAM ···························· 4-73
• VC-308 (20/21) (DC CONNECTOR)
SCHEMATIC DIAGRAM ···························· 4-75
• VC-308 (21/21) (USB HOST, USB I/F)
SCHEMATIC DIAGRAM ···························· 4-77
4-3.
PRINTED WIRING BOARDS
• CD-406 (CCD IMAGER, TIMING GENERATER)
SCHEMATIC DIAGRAM ···························· 4-97
• DI-087 (CONNECTOR, EVF DRIVE, TIMING GEN,
HI CONTROL, DC-DC CONVERTER)
PRINTED WIRING BOARD ······················· 4-99
• VC-308 (CAMERA A/D CONVERTER, CAMERA
PROCESS, BASE BAND PROCESS, MPEG MOVIE/
DIGITAL STILL PROCESS, HI CONTROL, DIGITAL
STILL CONTROL, FLASH MEMORY, MPEG VIDEO
PROCESS, Q PROCESS, I. LINK I/F, MPEG AUDIO
ENCODER/DECODER, HEAD AMP, PLL,
A/D CONV, VIDEO IN/OUT, VIDEO BUFFER, USB I/
F, DRUM CAPSTAN/ LOADING MOTOR DRIVE,
CAMERA ONTROL, EVR, MECHA CONTROL,
SIGNAL PROCESS CONTROL, AUDIO I/O, MIC
DRIVE, AF, CONNECTOR, DD CONNECTOR,
USB HOST, USB I/F)
DIGITAL STILL PROCESS, HI CONTROL, DIGITAL
STILL CONTROL, FLASH MEMORY, MPEG VIDEO
PROCESS, Q PROCESS, I. LINK I/F, MPEG AUDIO
ENCODER/DECODER, HEAD AMP, PLL,
A/D CONV, VIDEO IN/OUT, VIDEO BUFFER, USB I/
F, DRUM CAPSTAN/ LOADING MOTOR DRIVE,
CAMERA ONTROL, EVR, MECHA CONTROL,
SIGNAL PROCESS CONTROL, AUDIO I/O, MIC
DRIVE, AF, CONNECTOR, DD CONNECTOR,
USB HOST, USB I/F)
PRINTED WIRING BOARD ····················· 4-103
4-4.
WAVEFORMS ···························································· 4-110
4-5.
MOUNTED PARTS LOCATION ······························· 4-114
5.
REPAIR PARTS LIST
5-2.
ELECTRICAL PARTS LIST ········································ 5-18
DCR-IP210/IP210E/IP220/IP220E
COVER
COVER
Link
Link
4-2. SCHEMATIC DIAGRAMS
VC-308 BOARD (5/21)
(HI CONTROL, DIGITAL STILL CONTROL)
VC-308 BOARD (4/21)
(MPEG MOVIE/DIGITAL STILL PROCESS)
VC-308 BOARD (9/21)
(I. LINK I/F)
VC-308 BOARD (7/21)
(MPEG VIDEO PROCESS)
VC-308 BOARD (6/21)
(FLASH MEMORY)
VC-308 BOARD (8/21)
(Q PROCESS)
VC-308 BOARD (19/21)
(CONNECTOR)
VC-308 BOARD (20/21)
(DD CONNECTOR)
VC-308 BOARD (21/21)
(USB HOST, USB I/F)
VC-308 BOARD (18/21)
(MIC DRIVE, AF)
VC-308 BOARD (17/21)
(AUDIO I/O)
VC-308 BOARD (1/21)
(CAMERA A/D CONVERTER)
VC-308 BOARD (2/21)
(CAMERA PROCESS)
VC-308 BOARD (3/21)
(BASE BAND PROCESS)
VC-308 BOARD (14/21)
(DRUM/CAPSTAN/LOADING MOTOR DRIVE)
VC-308 BOARD (16/21)
(MECHA COTNROL, SIGNAL PROCESS CONTROL)
VC-308 BOARD (12/21)
(VIDEO IN/OUT, VIDEO BUFFER)
VC-308 BOARD (10/21)
(MPEG AUDIO ENCODER/DECODER)
VC-308 BOARD (11/21)
(HEAD AMP, PLL, A/D CONV)
VC-308 BOARD (13/21)
(USB I/F)
VC-308 BOARD (15/21)
(CAMERA CONTROL, EVR)
DI-087 BOARD (2/4)
(EVF DRIVE, TIMING GEN)
DI-087 BOARD (3/4)
(HI CONTROL)
DI-087 BOARD (4/4)
(DC-DC CONVERTER)
DI-087 BOARD (1/4)
(CONNECTOR)
CD-406 BOARD (2/2)
(TIMING GENERATER)
CD-406 BOARD (1/2)
(CCD IMAGER)
FP-540 FLEXIBLE BOARD
VC-308 BOARD (5/21)
(HI CONTROL, DIGITAL STILL CONTROL)
VC-308 BOARD (4/21)
(MPEG MOVIE/DIGITAL STILL PROCESS)
VC-308 BOARD (9/21)
(I. LINK I/F)
VC-308 BOARD (7/21)
(MPEG VIDEO PROCESS)
VC-308 BOARD (6/21)
(FLASH MEMORY)
VC-308 BOARD (8/21)
(Q PROCESS)
VC-308 BOARD (19/21)
(CONNECTOR)
VC-308 BOARD (20/21)
(DD CONNECTOR)
VC-308 BOARD (21/21)
(USB HOST, USB I/F)
VC-308 BOARD (18/21)
(MIC DRIVE, AF)
VC-308 BOARD (17/21)
(AUDIO I/O)
VC-308 BOARD (1/21)
(CAMERA A/D CONVERTER)
VC-308 BOARD (2/21)
(CAMERA PROCESS)
VC-308 BOARD (3/21)
(BASE BAND PROCESS)
VC-308 BOARD (14/21)
(DRUM/CAPSTAN/LOADING MOTOR DRIVE)
VC-308 BOARD (16/21)
(MECHA COTNROL, SIGNAL PROCESS CONTROL)
VC-308 BOARD (12/21)
(VIDEO IN/OUT, VIDEO BUFFER)
VC-308 BOARD (10/21)
(MPEG AUDIO ENCODER/DECODER)
VC-308 BOARD (11/21)
(HEAD AMP, PLL, A/D CONV)
VC-308 BOARD (13/21)
(USB I/F)
VC-308 BOARD (15/21)
(CAMERA CONTROL, EVR)
DI-087 BOARD (2/4)
(EVF DRIVE, TIMING GEN)
DI-087 BOARD (3/4)
(HI CONTROL)
DI-087 BOARD (4/4)
(DC-DC CONVERTER)
FP-540 FLEXIBLE BOARD
DI-087 BOARD (1/4)
(CONNECTOR)
CD-406 BOARD (2/2)
(TIMING GENERATER)
CD-406 BOARD (1/2)
(CCD IMAGER)
WAVEFORMS
COMMON NOTE FOR SCHEMATIC DIAGRAMS
WAVEFORMS
COMMON NOTE FOR SCHEMATIC DIAGRAMS
