Read Sony DCR-HC90 / DCR-HC90E (serv.man4) Service Manual online
6-65
DCR-HC90/HC90E
12. Record of Use check (2)
Page 7
Address C8 to CD
Using method:
1)
1)
The record of use data is displayed at addresses: C8 to CD.
13. Record of Self-diagnosis check
Page 7
Address B0 to C6
Address
C8
C9
CA
CB
CC
CD
Function
User initial power
Year
on date
Month
(BCD code)
Day
Final condensation
Year
occurrence data
Month
(BCD code)
Day
Remarks
After setting the clock, set the date of power on next
Note1: This data will be kept even if the lithium battery (Control switch block (ZM11600) BT8601) is removed.
Note2: The data of page: 0, address: 10 must be “00”.
Note2: The data of page: 0, address: 10 must be “00”.
Address
Self-diagnosis code
B0
“Repaired by” code (Occurred 1st time) *1
B1
“Block function” code (Occurred 1st time)
B2
“Detailed” code (Occurred 1st time)
B4
“Repaired by” code (Occurred 2nd time) *1
B5
“Block function” code (Occurred 2nd time)
B6
“Detailed” code (Occurred 2nd time)
B8
“Repaired by” code (Occurred 3rd time) *1
B9
“Block function” code (Occurred 3rd time)
BA
“Detailed” code (Occurred 3rd time)
BC
“Repaired by” code (Occurred 4th time) *1
BD
“Block function” code (Occurred 4th time)
BE
“Detailed” code (Occurred 4th time)
C0
“Repaired by” code (Occurred 5th time) *1
C1
“Block function” code (Occurred 5th time)
C2
“Detailed” code (Occurred 5th time)
C4
“Repaired by” code (Occurred the last time) *1
C5
“Block function” code (Occurred the last time)
C6
“Detailed” code (Occurred the last time)
*1: “01”
t “C”, “03” t “E”
Using method:
1)
1)
The past self-diagnosis codes are displayed at addresses: BC to C6. Refer to the following table.
Initializing method:
1)
1)
Select page: 7, address: 01, and set data: C0.
2)
Select page: 7, address: 00, set data: 01 and press the PAUSE button.
3)
Check that the data of page: 7, address: B0 to C7 are “00”.
4)
Select page: 7, address: 00, and set data: 00.
5)
Select page: 7, address: 01, and set data: 00.
Note3: When the flash error code (E: 91: **) is displayed. After repair, clear the error flag in the following method.
1) Select page: 7, address: 01, and set data: 75.
2) Select page: 7, address: 00, set data: 01 and press the PAUSE button.
3) Check that the data of page: 7, address: 02 is “01”.
2) Select page: 7, address: 00, set data: 01 and press the PAUSE button.
3) Check that the data of page: 7, address: 02 is “01”.
Note1: This data will be kept even if the lithium battery (Control switch block (ZM11600) BT8601) is removed.
Note2: The data of page: 0, address: 10 must be “00”.
Note2: The data of page: 0, address: 10 must be “00”.
Click on the first or last page to see other DCR-HC90 / DCR-HC90E (serv.man4) service manuals if exist.