Read Sony DCR-HC62 / DCR-HC62E (serv.man4) Service Manual online
6-9
DCR-HC62/HC62E_ADJ
Initializing method:
Order Page Address Data
Procedure
1
0
01
01
2
0
10
00
3
7
04
Set the following data
30: NTSC model
31: PAL model
31: PAL model
Set the following data
20: Initializing A page
21: Initializing B page
22: Initializing D page
23: Initializing 1A page
24: Initializing 1B page
21: Initializing B page
22: Initializing D page
23: Initializing 1A page
24: Initializing 1B page
4
7
00
25: Initializing A and 1A
page
26: Initializing B and 1B
page
27: Initializing 0D page
5
7
00
01
Press PAUSE (Write) button.
6
7
02
Check the data changes to
“01”.
“01”.
7
Perform “Modification of A,
B, D, 1A, 1B Page Data”
B, D, 1A, 1B Page Data”
Note 2: NTSC model: DCR-HC62
PAL model: DCR-HC62E
1-2.
INITIALIZATION OF EVR DATA
Note 1: Pages used for the EVR consists of 22 pages. There are
8, A to D, 18, 1A to 1C, 63 to 6F pages.
Note 2: When reading or writing the 18, 1A, 1B or 1C page data,
select page: 0, address: 10, and set data: 01, then select
8, A, B or C page. The 18, 1A, 1B or 1C page can be
chosen by this data setting.
After reading or writing, reset the data or page: 0, ad-
dress: 10 to “00”.
8, A, B or C page. The 18, 1A, 1B or 1C page can be
chosen by this data setting.
After reading or writing, reset the data or page: 0, ad-
dress: 10 to “00”.
Note 3: When reading or writing the 63 to 6F page data, select
page: 0, address: 10, and set data: 06, then select 3, 4, 5,
6, 7, 8, 9, A, B, C, D, E, or F page. The 63, 64, 65, 66, 67,
68, 69, 6A, 6B, 6C, 6D, 6E, or 6F page can be chosen by
this data setting.
After reading or writing, reste the data of page: 0, ad-
dress: 10 to “00”.
6, 7, 8, 9, A, B, C, D, E, or F page. The 63, 64, 65, 66, 67,
68, 69, 6A, 6B, 6C, 6D, 6E, or 6F page can be chosen by
this data setting.
After reading or writing, reste the data of page: 0, ad-
dress: 10 to “00”.
1-2-1.
Initialization of A, B, D, 1A, 1B Page Data
Note: Check that the data of page: 0, address: 10 is “00”.
1.
Initializing of A, B, D, 1A, 1B Page Data
Note 1: If the A, B, D, 1A, 1B page data has been initialized, the
following adjustments need to be performed again.
1) Modification of A, B, D, 1A, 1B page data
2) Touch panel adjustment
1) Modification of A, B, D, 1A, 1B page data
2) Touch panel adjustment
Adjustment Page
A
Adjustment Address
10 to FF
Adjustment Page
B
Adjustment Address
00 to FF
Adjustment Page
D
Adjustment Address
10 to 7F
Adjustment Page
1A
Adjustment Address
00 to FF
Adjustment Page
1B
Adjustment Address
00 to FF
Click on the first or last page to see other DCR-HC62 / DCR-HC62E (serv.man4) service manuals if exist.