Read Sony DCR-HC47E / DCR-HC48 / DCR-HC48E (serv.man3) Service Manual online
Revision History
Revision History
Sony EMCS Co.
DCR-HC47E/HC48/HC48E_L1
SERVICE MANUAL
LEVEL
1
Link
Link
MODEL INFORMATION TABLE
ACCESSORIES
SPECIFICATIONS
SELF DIAGNOSIS FUNCTION
INSTRUCTION MANUAL
2008E0500-1
© 2008.5
Published by Kohda TEC
9-852-170-42
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
DIGITAL VIDEO CAMERA RECORDER
N MECHANISM (MDX-N110)
Ver. 1.2 2008.05
US Model
Canadian Model
AEP Model
UK Model
East European Model
North European Model
E Model
Australian Model
Chinese Model
Korea Model
Tourist Model
Photo: DCR-HC48
RMT-831
DCR-HC47E/HC48/HC48E
Revised-1
Replace the previously issued
SERVICE MANUAL 9-852-170-41
with this manual.
SERVICE MANUAL 9-852-170-41
with this manual.
— 2 —
DCR-HC47E/HC48/HC48E_L1
SPECIFICATIONS
These specifications are extracted from instruction
manual of DCR-HC47E/HC48E.
manual of DCR-HC47E/HC48E.
System
Video recording system
2 rotary heads, Helical scanning system
Still image recording system
Exif Ver. 2.2
*
Audio recording system
Rotary heads, PCM system
Quantization: 12 bits (Fs 32 kHz, stereo
1, stereo 2), 16 bits (Fs 48 kHz, stereo)
Quantization: 12 bits (Fs 32 kHz, stereo
1, stereo 2), 16 bits (Fs 48 kHz, stereo)
Video signal
PAL color, CCIR standards
Usable cassette
Mini DV cassette with the
mark
printed
Tape speed
SP: Approx. 18.81 mm/s
LP: Approx. 12.56 mm/s
LP: Approx. 12.56 mm/s
Recording/playback time
SP: 60 min (using a DVM60 cassette)
LP: 90 min (using a DVM60 cassette)
LP: 90 min (using a DVM60 cassette)
Fast forward/rewind time
Approx. 2 min 40 s (using a DVM60
cassette and rechargeable battery pack)
Approx. 1 min 45 s (using a DVM60
cassette and AC Adaptor)
cassette and rechargeable battery pack)
Approx. 1 min 45 s (using a DVM60
cassette and AC Adaptor)
Viewfinder
Electric viewfinder (0.27 type, aspect
ratio 16:9, 123 200 dots)
ratio 16:9, 123 200 dots)
Image device
3 mm (1/6 type) CCD (Charge Coupled
Device)
Gross: Approx. 1 070 000 pixels
Effective (still): 1 000 000 pixels
Effective (movie): 690 000 pixels
Device)
Gross: Approx. 1 070 000 pixels
Effective (still): 1 000 000 pixels
Effective (movie): 690 000 pixels
Lens
Carl Zeiss Vario-Tessar
25
25
× (Optical), 2 000 × (Digital)
Focal length
f=2.5 ~ 62.5 mm (1/8 ~ 2 1/2 in.)
When converted to a 35 mm still
camera
When converted to a 35 mm still
camera
In CAMERA-TAPE:
41 ~ 1 189 mm
41 ~ 1 189 mm
**
(1 5/8 ~ 46 7/8 in.)
(16:9)
43 ~ 1 075 mm (1 3/4 ~ 42 3/8 in.) (4:3)
In CAMERA-MEMORY:
36 ~ 900 mm (1 7/16 ~ 35 1/2 in.) (4:3)
39 ~ 975 mm (1 9/16 ~ 38 1/2 in.) (16:9)
F1.8 ~ 3.2
Filter diameter: 30 mm (1 3/16 in.)
43 ~ 1 075 mm (1 3/4 ~ 42 3/8 in.) (4:3)
In CAMERA-MEMORY:
36 ~ 900 mm (1 7/16 ~ 35 1/2 in.) (4:3)
39 ~ 975 mm (1 9/16 ~ 38 1/2 in.) (16:9)
F1.8 ~ 3.2
Filter diameter: 30 mm (1 3/16 in.)
Color temperature
[AUTO], [ONE PUSH], [INDOOR]
(3 200 K), [OUTDOOR] (5 800 K)
(3 200 K), [OUTDOOR] (5 800 K)
Minimum illumination
4 lx (lux) (AUTOSLW SHTR ON,
Shutter speed 1/25 s)
0 lx (lux) (during NightShot plus
function)
Shutter speed 1/25 s)
0 lx (lux) (during NightShot plus
function)
Output connectors
Audio/Video output
10-pin connector
Video signal: 1 Vp-p, 75
Video signal: 1 Vp-p, 75
Ω (ohms)
Luminance signal: 1 Vp-p, 75
Ω (ohms)
Chrominance signal: 0.3 Vp-p, 75
Ω
(ohms)
Audio signal: 327 mV (at load
impedance 47 k
Audio signal: 327 mV (at load
impedance 47 k
Ω (kilohms)), Output
impedance with less than 2.2 k
Ω
(kilohms)
LCD screen
Picture
6.9 cm (2.7 type, aspect ratio 16:9)
Total dot number
123 200 (560
× 220)
*
“Exif” is a file format for still images,
established by the JEITA (Japan
Electronics and Information Technology
Industries Association). Files in this
format can have additional information
such as your camcorder’s setting
information at the time of recording.
established by the JEITA (Japan
Electronics and Information Technology
Industries Association). Files in this
format can have additional information
such as your camcorder’s setting
information at the time of recording.
**
The focal length figures are actual figures
resulting from wide angle pixel read-out.
resulting from wide angle pixel read-out.
General
Power requirements
DC 6.8 V/7.2 V (battery pack)
DC 8.4 V (AC Adaptor)
DC 8.4 V (AC Adaptor)
Average power consumption
During camera recording using the
viewfinder 2.5 W
During camera recording using the
LCD 2.8 W
viewfinder 2.5 W
During camera recording using the
LCD 2.8 W
Operating temperature
0
°C to 40 °C (32 °F to 104 °F)
Storage temperature
-20
°C to + 60 °C (-4 °F to + 140 °F)
Dimensions (approx.)
63
× 85 × 114 mm
(2 1/2
× 3 3/8 × 4 1/2 in.) (w/h/d)
including the projecting parts
63
63
× 85 × 115 mm
(2 1/2
× 3 3/8 × 4 5/8 in.) (w/h/d)
including the projecting parts with
supplied battery pack NP-FH40
attached
supplied battery pack NP-FH40
attached
Mass (approx.)
400 g (14 oz) main unit only,
465 g (1 lb) including the NP-FH40
rechargeable battery pack and DVM60
cassette
465 g (1 lb) including the NP-FH40
rechargeable battery pack and DVM60
cassette
Supplied accessories
See page 6.
Handycam Station Input/Output
connectors
DCRA-C155 (DCR-HC48E)
connectors
DCRA-C155 (DCR-HC48E)
Audio/Video output
10-pin connector
Video signal: 1 Vp-p, 75
Video signal: 1 Vp-p, 75
Ω (ohms)
Luminance signal: 1 Vp-p, 75
Ω (ohms)
Chrominance signal: 0.3 Vp-p, 75
Ω
(ohms)
Audio signal: 327 mV (at load
impedance 47 k
impedance 47 k
Ω (kilohms)), Output
impedance with less than 2.2 k
Ω
(kilohms)
USB jack
mini-B
DV input/output
i.LINK Interface (IEEE1394, 4-pin
connector S100)
connector S100)
DCRA-C156 (DCR-HC47E)
Audio/Video output
10-pin connector
Video signal: 1 Vp-p, 75
Video signal: 1 Vp-p, 75
Ω (ohms)
Luminance signal: 1 Vp-p, 75
Ω (ohms)
Chrominance signal: 0.3 Vp-p, 75
Ω
(ohms)
Audio signal: 327 mV (at load
impedance 47 k
Audio signal: 327 mV (at load
impedance 47 k
Ω (kilohms)), Output
impedance with less than 2.2 k
Ω
(kilohms)
USB jack
mini-B
DV output
i.LINK Interface (IEEE1394, 4-pin
connector S100)
connector S100)
AC Adaptor AC-L200/L200B
Power requirements
AC 100 - 240 V, 50/60 Hz
Current consumption
0.35 - 0.18 A
Power consumption
18 W
Output voltage
DC 8.4 V
*
Operating temperature
0
°C to 40 °C (32 °F to 104 °F)
Storage temperature
-20
°C to + 60 °C (-4 °F to + 140 °F)
Dimensions (approx.)
48
× 29 × 81 mm
(1 15/16
× 1 3/16 × 3 1/4 in.) (w/h/d)
excluding the projecting parts
Mass (approx.)
170 g (6.0 oz) excluding the mains lead
AC Adaptor (1)
Mains lead (1)
Handycam Station (1)
Wireless Remote Commander (1)
A/V connecting cable (1)
Mains lead (1)
Handycam Station (1)
Wireless Remote Commander (1)
A/V connecting cable (1)
USB cable (1)
Rechargeable battery pack NP-FH40 (1)
Rechargeable battery pack NP-FH40 (1)
CD-ROM “Handycam Application
Software” (1)
Software” (1)
21-pin adaptor (1)
Operating Guide (1)
Operating Guide (1)
*
See the label on the AC Adaptor for
other specifications.
other specifications.
Rechargeable battery pack NP-FH40
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
4.9 Wh (680 mAh)
Dimensions (approx.)
31.8
× 18.5 × 45.0 mm
(1 5/16
× 3/4 × 1 13/16 in.) (w/h/d)
Mass (approx.)
45 g (1.6 oz)
Operating temperature
0
°C to 40 °C (32 °F to 104 °F)
Type
Lithium ion
Design and specifications are subject to change
without notice.
without notice.
— 3 —
DCR-HC47E/HC48/HC48E_L1
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270°C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
Model
DCR-HC47E
DCR-HC48
DCR-HC48E
Destination
AEP, UK, EE, NE
US, CND, E, KR,
NE, E, AUS, CH,
JE
JE
Color system
PAL
NTSC
PAL
DV Interface on the Cradle
OUT
IN/OUT
IN/OUT
(Handycam Station)
• Abbreviation
AR
: Argentine model
AUS : Australian model
BR
BR
: Brazilian model
CH
: Chinese model
CND : Canadian model
EE
EE
: East European model
HK : Hong Kong model
JE
JE
: Tourist model
KR
: Korea model
NE
: North European model
Model information table
— 4 —
DCR-HC47E/HC48/HC48E_L1
1.
Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder or LCD
screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
function starts working, and displays on the viewfinder or LCD
screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
2. Self-diagnosis Display
When problems occur while the unit is operating, the counter of the
viewfinder or LCD screen shows a 4-digit display consisting of an
alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the “repaired by:”, “block” in which the problem
occurred, and “detailed code” of the problem.
viewfinder or LCD screen shows a 4-digit display consisting of an
alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the “repaired by:”, “block” in which the problem
occurred, and “detailed code” of the problem.
1 1
3 1
C
Repaired by:
Refer to “1-5-3. Self-diagnosis Code Table”.
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2Hz
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
H : Corrected by dealer
E : Corrected by service
engineer
Viewfinder or LCD screen
C : 3 1 : 1 1
SELF-DIAGNOSIS FUNCTION
