Read Sony DCR-HC47E / DCR-HC48 / DCR-HC48E (serv.man2) Service Manual online
1-4
ENGLISH
JAPANESE
ENGLISH
JAPANESE
DCR-HC47E/HC48/HC48E_L2
E
E
E
E
E
Block
Function
6
1
6
1
6
1
6
2
6
2
Detailed
Code
0
0
1
0
1
1
0
0
0
1
Symptom/State
Difficult to adjust focus
(Cannot initialize focus.)
(Cannot initialize focus.)
Zoom operations fault
(Cannot initialize zoom lens.)
(Cannot initialize zoom lens.)
Focus lens initializing failure and zoom
lens initializing failure occur simulta-
neously.
lens initializing failure occur simulta-
neously.
Steadyshot function does not work well.
(With pitch angular velocity sensor output
stopped.)
(With pitch angular velocity sensor output
stopped.)
Steadyshot function does not work well.
(With yaw angular velocity sensor output
stopped.)
(With yaw angular velocity sensor output
stopped.)
Self-diagnosis Code
Repaired b
y:
Correction
Inspect the lens block focus reset sensor (Pin 7 of CN3801 of VC-
472 board) when focusing is performed when the touch panel is
operated in the focus manual mode and the focus motor drive circuit
(IC3802 of VC-472 board) when the focusing is not performed.
472 board) when focusing is performed when the touch panel is
operated in the focus manual mode and the focus motor drive circuit
(IC3802 of VC-472 board) when the focusing is not performed.
Inspect the lens block zoom reset sensor (Pin qa of CN3801 of
VC-472 board) when zooming is performed when the zoom switch
is operated and the zoom motor drive circuit (IC3802 of VC-472
board) when zooming is not performed.
VC-472 board) when zooming is performed when the zoom switch
is operated and the zoom motor drive circuit (IC3802 of VC-472
board) when zooming is not performed.
Inspect the flexible board for breakage or loose connection.
If not faulty, inspect the focus and zoom motor drive circuit (IC3802
of VC-472 board).
If not faulty, inspect the focus and zoom motor drive circuit (IC3802
of VC-472 board).
Inspect pitch angular velocity sensor (SE7002 of CD-672 board)
peripheral circuits.
peripheral circuits.
Inspect yaw angular velocity sensor (SE7001 of CD-672 board)
peripheral circuits.
peripheral circuits.
1-6. PRECAUTION ON REPLACING THE VC-472 BOARD
Exif Model Data Check
When you replace to the repairing board, the written data of repairing board also might be changed to original setting.
When the data has changed because of board replaceing etc, check the data setting (Exif Model Data) is right. If not, rewrite to the right value.
When the data has changed because of board replaceing etc, check the data setting (Exif Model Data) is right. If not, rewrite to the right value.
Exif Model Data
Writing Method:
1) Select page: 0, address: 01 and set data: 01.
2) Select page: C, address: D2 to D4, and set the Exif Model Data.
1) Select page: 0, address: 01 and set data: 01.
2) Select page: C, address: D2 to D4, and set the Exif Model Data.
Note:
To write in the non-volatile memory (EEPROM), press the PAUSE (Write) button each time to set the data.
3) Select page: 0, address: 01, and set data: 00.
Page
C
C
C
Data
DCR-HC47E
34
37
45
DCR-HC48
34
38
00
DCR-HC48E
34
38
45
Address
D2
D3
D4
Click on the first or last page to see other DCR-HC47E / DCR-HC48 / DCR-HC48E (serv.man2) service manuals if exist.