DCR-HC40, DCR-HC40E - Sony Movie Service Manual (repair manual)

dcr-hc40, dcr-hc40e service manual
Model
DCR-HC40 DCR-HC40E
Pages
49
Size
5.97 MB
Type
PDF
Document
Service Manual
Brand
Device
Movie / LEVEL 3
File
dcr-hc40-dcr-hc40e.pdf
Date

Read Sony DCR-HC40 / DCR-HC40E Service Manual online

SERVICE MANUAL
LEVEL
 
3
Revision History
Revision History
How to use
Acrobat Reader
How to use
Acrobat Reader
DCR-HC40/HC40E
RMT-831
Link
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SCHEMATIC DIAGRAMS
Link
The information that is not described in this Service Manual is described
in the LEVEL 2 Service Manual.
When repairing, use this manual together with LEVEL 2 Service Manual.
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (987670341.pdf). (EXCEPT J MODEL)
• Reference No. search on printed wiring boards is available.
Ver. 1.5  2007. 09
DIGITAL VIDEO CAMERA RECORDER
Photo : DCR-HC40E
US Model
Canadian Model
Brazilian Model
Korea Model
Japanese Model
DCR-HC40
AEP Model
UK Model
East European Model
North European Model
Australian Model
Chinese Model
DCR-HC40E
E Model
Hong Kong Model
Tourist Model
DCR-HC40/HC40E
Contents of LEVEL 2 Service Manual
1. SERVICE NOTE
2. DISASSEMBLY
3. BLOCK DIAGRAMS
4. PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
5. REPAIR PARTS LIST
6. ADJUSTMENTS
OVERALL
POWER
CD-490, PD-213, LB-095, SE-141,
JK-260, IR-051, MS-200, FP-836
BOARD,
CONTROL KEY BLOCK
(SB6300, SS6300, CF6300)
FP-228, FP-467, FP-826, FP-830
FLEXIBLE BOARD
EXPLODED VIEWS
ELECTRICAL PARTS LIST
Z MECHANISM (MDX-Z200)
Revised-1
This REVISED-1 is the supplied and corrected version
of SUPPLEMENT-1 and CORRECTION-2.
Replace the SUPPLEMENT-1 and CORRECTION-2
with the REVISED-1.
Please discard the SUPPLEMENT-1 and CORRECTION-2.
DCR-HC40/HC40E
— 2 —
ENGLISH
JAPANESE
ENGLISH
JAPANESE
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
°
C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°
C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 
0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
— 3 —
DCR-HC40/HC40E
ENGLISH
JAPANESE
ENGLISH
JAPANESE
— 4 —
DCR-HC40/HC40E
TABLE OF CONTENTS
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-2.
SCHEMATIC DIAGRAMS
• VC-352 (1/21) (TIMING GENERATOR, S/H, AGC,
A/D CONV.)
SCHEMATIC DIAGRAM ···························· 4-19
• VC-352 (2/21) (LENS DRIVE)
SCHEMATIC DIAGRAM ···························· 4-21
• VC-352 (3/21) (CAMERA PROCESS)
SCHEMATIC DIAGRAM ···························· 4-23
• VC-352 (4/21) (MPEG MOVIE/DIGITAL STILL
PROCESS)
SCHEMATIC DIAGRAM ···························· 4-25
• VC-352 (5/21) (64Mbit SDRAM, BUFFER)
SCHEMATIC DIAGRAM ···························· 4-27
• VC-352 (6/21) (HI/DIGITAL STILL CONTROL)
SCHEMATIC DIAGRAM ···························· 4-29
• VC-352  (7/21) (32Mbit FLASH, 16Mbit SDRAM)
SCHEMATIC DIAGRAM ···························· 4-31
• VC-352 (8/21) (DV SIGNAL PROCESS)
SCHEMATIC DIAGRAM ···························· 4-33
• VC-352 (9/21) (DV INTERFACE)
SCHEMATIC DIAGRAM ···························· 4-35
• VC-352 (10/21) (REC/PB AMP)
SCHEMATIC DIAGRAM ···························· 4-37
• VC-352 (11/21) (VIDEO I/O)
SCHEMATIC DIAGRAM ···························· 4-39
• VC-352 (12/21) (DRUM/CAPSTAN/LOADING DRIVE)
SCHEMATIC DIAGRAM ···························· 4-41
• VC-352 (13/21) (CAMERA/MECHA CONTROL)
SCHEMATIC DIAGRAM ···························· 4-43
• VC-352 (14/21) (HI CONTROL)
SCHEMATIC DIAGRAM ···························· 4-45
• VC-352 (15/21) (EVF VIDEO)
SCHEMATIC DIAGRAM ···························· 4-47
• VC-352 (16/21) (AUDIO I/O)
SCHEMATIC DIAGRAM ···························· 4-49
• VC-352 (17/21) (MIC AMP)
SCHEMATIC DIAGRAM ···························· 4-51
• VC-352 (18/21) (DC IN, CHARGE)
SCHEMATIC DIAGRAM ···························· 4-53
• VC-352 (19/21) (DC/DC CONVERTER)
SCHEMATIC DIAGRAM ···························· 4-55
• VC-352 (20/21) (CONNECTOR)
SCHEMATIC DIAGRAM ···························· 4-57
• VC-352 (21/21) (CONNECTOR)
SCHEMATIC DIAGRAM ···························· 4-59
4-3.
PRINTED WIRING BOARDS
• VC-352 (TIMING GENERATOR, S/H, AGC, A/D
CONV., LENS DRIVE, CAMERA PROCESS,
MPEG MOVIE/DIGITAL STILL PROCESS,
64Mbit SDRAM, BUFFER, HI/DIGITAL
STILL CONTROL, 32Mbit FLASH, 16Mbit
SDRAM, DV SIGNAL PROCESS, DV
INTERFACE, REC/PB AMP, VIDEO I/O,
DRUM/CAPSTAN/LOADING DRIVE,
CAMERA/MECHA CONTROL,
HI CONTROL, EVF VIDEO, AUDIO I/O,
MIC AMP, DC IN, CHARGE, DC/DC
CONVERTER, CONNECTOR)
PRINTED WIRING BOARD ······················· 4-75
4-4.
MOUNTED PARTS LOCATION ································· 4-83
5.
REPAIR PARTS LIST
5-2.
ELECTRICAL PARTS LIST ········································ 5-17
Page of 49
Display

Download Sony DCR-HC40 / DCR-HC40E Service Manual (Repair Manual)

Here you can read online and download Sony DCR-HC40 / DCR-HC40E Service Manual in PDF. DCR-HC40 / DCR-HC40E service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DCR-HC40 / DCR-HC40E Movie. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.