Read Sony DCR-HC40 / DCR-HC40E (serv.man7) Service Manual online
— 3 —
DCR-HC40/HC40E
1-3.
CAMERA SYSTEM ADJUSTMENTS
Before perform the camera system adjustments (except for “54MHz
(HC40E)/66MHz (HC40) Origin Oscillation Check”), check that
the specified values of “VIDEO SYSTEM ADJUSTMENTS” are
satisfied.
And check that the data of page: 0, address: 10 is “00”. If not, set
data: 00 to this address.
(HC40E)/66MHz (HC40) Origin Oscillation Check”), check that
the specified values of “VIDEO SYSTEM ADJUSTMENTS” are
satisfied.
And check that the data of page: 0, address: 10 is “00”. If not, set
data: 00 to this address.
1. 54MHz (HC40E)/66MHz (HC40) Origin Oscillation
Check (VC-352 board)
Set the frequency of the clock for synchronization.
If deviated, the synchronization will be disrupted and the color will
become inconsistent.
If deviated, the synchronization will be disrupted and the color will
become inconsistent.
1-3.
CAMERA SYSTEM ADJUSTMENTS
Before perform the camera system adjustments (except for “54MHz
(HC40E)/66MHz (HC40) Origin Oscillation Check”), check that
the specified values of “VIDEO SYSTEM ADJUSTMENTS” are
satisfied.
And check that the data of page: 0, address: 10 is “00”. If not, set
data: 00 to this address.
(HC40E)/66MHz (HC40) Origin Oscillation Check”), check that
the specified values of “VIDEO SYSTEM ADJUSTMENTS” are
satisfied.
And check that the data of page: 0, address: 10 is “00”. If not, set
data: 00 to this address.
0. Change data in replacing LENS
When replacing the following LENS, change the data as below too.
-LENS
When replacing the following LENS, change the data as below too.
-LENS
841A (CZ) BLOCK ASSY (A-7112-105-A)
-DATA CHANGE
Page : 1E, Address : B9, Data : 10
r
Page : 1E, Address : B9, Data : 04
1. 54MHz (HC40E)/66MHz (HC40) Origin Oscillation
Check (VC-352 board)
Set the frequency of the clock for synchronization.
If deviated, the synchronization will be disrupted and the color will
become inconsistent.
If deviated, the synchronization will be disrupted and the color will
become inconsistent.
Before change
After change
Page 6-21
Page
Before change
6-57
: Added portion
After change
5. Switch check (1)
Bit
0
1
2
3
4
Function
POWER SW (XPOWER SW) (SS6300 block)
MODE SW (XMODE SW) (SS6300 block)
EJECT SW (XEJECT SW) (SS6300 block S004)
CC DOWN SW (Mechanism chassis)
DISPLAY/BATTERY INFO SW (XBATT INFO SW)
(CF6300 block S003)
(CF6300 block S003)
When bit value=1
ON
ON
ON
ON (DOWN)
ON
When bit value=0
OFF
OFF
OFF
OFF (UP)
OFF
Bit
0
1
2
3
4
Function
POWER SW (XPOWER SW) (SS6300 block)
MODE SW (XMODE SW) (SS6300 block)
DISPLAY/BATTERY INFO SW (XBATT INFO SW)
(CF6300 block S003)
(CF6300 block S003)
EJECT SW (XEJECT SW) (SS6300 block S004)
CC DOWN SW (Mechanism chassis)
When bit value=1
ON
ON
ON
ON
ON (DOWN)
When bit value=0
OFF
OFF
OFF
OFF
OFF (UP)
: Changed portion
5. Switch check (1)
Page 6-60
: Changed portion
Before change
After change
Using method:
1)
1)
The past self-diagnosis codes are displayed at addresses: BC to C6. Refer to the following table.
Using method:
1)
1)
The past self-diagnosis codes are displayed at addresses: BC to C6. Refer to “SELF-DIAGNOSIS CODE TABLE” for detail of the
self-diagnosis code.
self-diagnosis code.
Click on the first or last page to see other DCR-HC40 / DCR-HC40E (serv.man7) service manuals if exist.