DCR-HC26 (serv.man2) - Sony Movie Service Manual (repair manual)

dcr-hc26 (serv.man2) service manual
Model
DCR-HC26 (serv.man2)
Pages
70
Size
5.72 MB
Type
PDF
Document
Service Manual
Brand
Device
Movie / BRAZIL LEVEL 2
File
dcr-hc26-sm2.pdf
Date

Read Sony DCR-HC26 (serv.man2) Service Manual online

MANUAL DE SERVIÇO
Sony EMCS Co.- Sony Brasil Ltda.
LEVEL
 
2
NOTA DE SERVIÇO
ESPECIFICAÇÕES
DIAGRAMAS ESQUEMÁTICOS FRAME
DIAGRAMAS EM BLOCOS
DESMONTAGEM
PLACAS DE CIRCUITO IMPRESSO
LISTA DE PEÇAS PARA REPARO
DIAGRAMAS ESQUEMÁTICOS
Link
Instruções do
Acrobat Reader
Ver 1.0  2006.01
CÂMARA DE VÍDEO DIGITAL
  © 2006.2
Publicado por Engenharia da Qualidade
Brazilian Model
Foto: DCR-HC26
DCR-HC26
Os componentes indentificados
com a marca 0 são críticos
para a segurança.
Somente os substitua por peças
especificadas nesse manual.
• Precaução em consertar a placa VC-416
N MECHANISM (MDX-N110)
9-890-025-31
— 2 —
DCR-HC26
ESPECIFICAÇÕES
Estas especificações foram extraídas do manual de
instrução do DCR-HC26.
System
Video recording system
2 rotary heads, Helical scanning system
Audio recording system
Rotary heads, PCM system
Quantization: 12 bits (Fs 32 kHz, stereo 
1, stereo 2), 16 bits (Fs 48 kHz, stereo)
Video signal
PAL color, CCIR standards
Usable cassette
Mini DV cassette with the 
 mark 
printed
Tape speed
SP: Approx. 18.81 mm/s
LP: Approx. 12.56 mm/s
Recording/playback time
SP: 60 min (using a DVM60 cassette)
LP: 90 min (using a DVM60 cassette)
Fast forward/rewind time
Approx. 2 min 40 s (using a DVM60 
cassette and rechargeable battery pack)
Approx. 1 min 45 s (using a DVM60 
cassette and AC Adaptor)
Viewfinder
Electric viewfinder (color)
Image device
3.0 mm (1/6 type) CCD (Charge 
Coupled Device)
Gross: Approx. 800 000 pixels
Effective (movie): Approx. 400 000 
pixels
Lens
DCR-HC23E:
Carl Zeiss Vario-Tessar 
20 × (Optical), 640 × (Digital)
DCR-HC24E/HC26E/HC35E:
Carl Zeiss Vario-Tessar 
20 × (Optical), 800 × (Digital)
Focal length
f=2.3 ~ 46 mm (3/32 ~ 1 13/16 in.) 
When converted to a 35 mm still 
camera
In CAMERA: 44 ~ 880 mm (1 3/4 ~ 
34 1/32 in.)
F1.8 ~ 3.1
Filter diameter: 25 mm (1 in.)
Color temperature
[AUTO], [ONE PUSH], [INDOOR] 
(3 200 K), [OUTDOOR] (5 800 K)
Minimum illumination
5 lx (lux) (F 1.8)
0 lx (lux) (during NightShot plus 
function)
*
1
*
1
Objects unable to be seen due to the dark 
can be shot with infrared lighting.
Input/Output connectors
Audio/Video output
10-pin connector
Video signal: 1 Vp-p, 75 
Ω (ohms), 
unbalanced
Luminance signal: 1 Vp-p, 75 
(ohms), unbalanced
Chrominance signal: 0.3 Vp-p, 75 
(ohms), unbalanced
Audio signal: 327 mV (at load 
impedance 47 k
Ω (kilohms)), Output 
impedance with less than 2.2 k
(kilohms)
USB jack (DCR-HC23E/HC24E/HC26E)
mini-B
DV input/output (DCR-HC26E)
i.LINK Interface (IEEE1394, 4-pin 
connector S100)
DV output (DCR-HC23E/HC24E)
i.LINK Interface (IEEE1394, 4-pin 
connector S100)
LCD screen
Picture
6.2 cm (2.5 type)
Total dot number
123 200 (560 × 220)
General
Power requirements
DC 7.2 V (battery pack)
DC 8.4 V (AC Adaptor)
Average power consumption
During camera recording using the 
viewfinder 1.8 W
During camera recording using the 
LCD 2.1 W
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
-20 °C to + 60 °C (-4 °F to + 140 °F)
Dimensions (approx.)
65 × 79 × 113 mm 
(2 5/8 × 3 1/8 × 4 1/2 in.) (w/h/d)
Mass (approx.)
DCR-HC23E/HC24E/HC26E:
360 g (12 oz) main unit only 
420 g (14 oz) including the NP-FP30 
rechargeable battery pack and DVM60 
cassette.
DCR-HC35E:
370 g (13 oz) main unit only 
430 g (15 oz) including the NP-FP30 
rechargeable battery pack and DVM60 
cassette.
Audio signal: 327 mV (at load 
impedance 47 k
Ω (kilohms)), Output 
impedance with less than 2.2 k
(kilohms)
USB jack
mini-B
DV input/output
i.LINK Interface (IEEE1394, 4-pin 
connector S100)
AC Adaptor AC-L25A/L25B
Power requirements
AC 100 - 240 V, 50/60 Hz
Current consumption
0.35 - 0.18 A
Power consumption
18 W
Output voltage
DC 8.4 V
*
2
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
-20 °C to + 60 °C (-4 °F to + 140 °F)
Dimensions (approx.)
56 × 31 × 100 mm (2 1/4 × 1 1/4 × 4 in.) 
(w/h/d) excluding the projecting parts
Mass (approx.)
190 g (6.7 oz) excluding the mains lead
*
2
See the label on the AC Adaptor for 
other specifications.
Rechargeable battery pack (NP-FP30)
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
3.6 Wh (500 mAh)
Dimensions (approx.)
31.8 × 18.5 × 45.0 mm 
(1 5/16 × 3/4 × 1 13/16 in) (w/h/d)
Mass (approx.)
40 g (1.5 oz)
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Type
Lithium ion
Design and specifications are subject to change 
without notice.
Supplied accessories
See page 6.
AC Adaptor (1)
Mains lead (1)
Handycam Station (1) (DCR-HC35E)
Wireless Remote Commander (1)
(DCR-HC24E/HC35E)
A/V connecting cable (1)
USB cable (1) (DCR-HC24E/HC35E)
Lens cap (1)
Rechargeable battery pack NP-FP30 (1)
CD-ROM “Picture Package Ver.1.5.1” (1)
21-pin adaptor (1) (DCR-HC35E)
Operating Guide (1)
Handycam Station DCRA-C151 
Input/Output connectors (DCR-HC35E)
Audio/Video output
10- pin connector
Video signal: 1 Vp-p, 75 
Ω (ohms), 
unbalanced
Luminance signal: 1 Vp-p, 75 
(ohms) , unbalanced
Chrominance signal : 0.3 Vp-p, 75 
(ohms) , unbalanced
— 4 —
DCR-HC26
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0
 OR DOTTED LINE WITH
MARK 
0
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
VERIFICAÇÃO GERAL DE SEGURANÇA
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 
0
 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
— 5 —
DCR-HC26
INDICE
1. NOTA DE SERVIÇO
1-1.
Power Supply During Repairs ········································· 1-1
1-2.
To Take Out a Cassette when not Eject (Force Eject) ····· 1-1
1-3.
Setting the “Forced Power On” Mode ····························· 1-1
1-4.
Using Service Jig ····························································· 1-2
1-5.
Self-diagnosis Function ··················································· 1-2
1-6.
Precaution on Replacing the VC-416 Board ··················· 1-4
2. DESMONTAGEM
2-1.
Disassembly ····································································· 2-2
3. DIAGRAMAS EM BLOCO
3-1.
Overall Block Diagram (1/5) ··········································· 3-1
3-2.
Overall Block Diagram (2/5) ··········································· 3-2
3-3.
Overall Block Diagram (3/5) ··········································· 3-3
3-4.
Overall Block Diagram (4/5) ··········································· 3-4
3-5.
Overall Block Diagram (5/5) ··········································· 3-5
3-6.
Power Block Diagram (1/3) ············································· 3-6
3-7.
Power Block Diagram (2/3) ············································· 3-7
3-8.
Power Block Diagram (3/3) ············································· 3-8
4. PLACAS DE CIRCUITO IMPRESSO E 
DIAGRAMAS ESQUEMÁTICOS
4-1.
Frame Schematic Diagrams ············································· 4-1
4-2.
Schematic Diagrams ························································ 4-3
4-3.
Printed Wiring Boards ··················································· 4-25
4-4.
Mounted Parts Location ················································ 4-37
5. LISTA DE PEÇAS PARA REPARO
5-1.
Exploded Views ······························································· 5-2
5-2.
Electrical Parts List ······················································· 5-12
Section
Title
Page
Page of 70
Display

Download Sony DCR-HC26 (serv.man2) Service Manual (Repair Manual)

Here you can read online and download Sony DCR-HC26 (serv.man2) Service Manual in PDF. DCR-HC26 (serv.man2) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DCR-HC26 (serv.man2) Movie. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.