Read Sony DCR-HC17E / DCR-HC19E / DCR-HC21 / DCR-HC21E / DCR-HC22E / DCR-HC32 / DCR-HC32E / DCR-HC33 / DCR-HC33E (serv.man4) Service Manual online
6-62
DCR-HC17E/HC19E/HC21/HC21E/HC22E/HC32/HC32E/HC33/HC33E
3-4.
VIDEO SYSTEM ADJUSTMENTS
Before perform the video system adjustments, check that the speci-
fied values of “36 MHz Origin Oscillation Adjustment” of “1-3.
CAMERA SYSTEM ADJUSTMENTS” is satisfied.
Check that the data of page: 0, address: 10 is “00”.
If not, select page: 0, address: 10, and set the data “00”.
fied values of “36 MHz Origin Oscillation Adjustment” of “1-3.
CAMERA SYSTEM ADJUSTMENTS” is satisfied.
Check that the data of page: 0, address: 10 is “00”.
If not, select page: 0, address: 10, and set the data “00”.
Note :
Non MS model: DCR-HC17E/HC19E/HC21/HC21E/
HC22E
MS model: DCR-HC32/HC32E/HC33/HC33E
Adjusting Procedure:
1. S VIDEO OUT Y level adjustment
2. S VIDEO OUT chroma level adjustment
3. VIDEO OUT level check
1. S VIDEO OUT Y level adjustment
2. S VIDEO OUT chroma level adjustment
3. VIDEO OUT level check
1.
S VIDEO OUT Y Level Adjustment
(VC-376 board (Non MS model))
(VC-377 board (MS model))
(VC-376 board (Non MS model))
(VC-377 board (MS model))
Mode
CAMERA (Non MS model)
CAMERA-TAPE (MS model)
CAMERA-TAPE (MS model)
Subject
Arbitrary
Measurement Point
Y signal terminal of S VIDEO plug
of A/V jack (75
of A/V jack (75
Ω
terminated)
Measuring Instrument
Oscilloscope
Adjustment Page
C
Adjustment Address
25
Specified value
A = 1000
±
14 mVp-p
Note 1:
Check that the data of page: 0, address: 10 is “00”.
Switch setting:
1)
1)
DEMO MODE (Menu setting) ...................................... OFF
Fig. 6-3-5
H
A
Note 2:
For the bit values, refer to “6-4. SERVICE MODE”, “4-
3. 5. Bit value discrimination”.
3. 5. Bit value discrimination”.
4C
4C
Adjusting method:
Order Page Address Data
Procedure
1
0
01
01
2
8
A0
(Non MS model only)
Set the bit value of bit3 is
“1”, and press PAUSE
button. (Note 2)
(MS model only)
Set the bit value of bit1 is
“0”, and press PAUSE
button.(Note 2)
Set the bit value of bit3 is
“1”, and press PAUSE
button. (Note 2)
(MS model only)
Set the bit value of bit1 is
“0”, and press PAUSE
button.(Note 2)
3
3
0C
02
Press PAUSE button.
4
C
25
Change the data and set the Y
signal level (A) to the
specified value.
signal level (A) to the
specified value.
5
C
25
Press PAUSE button.
6
3
0C
00
Press PAUSE button.
7
8
A0
(Non MS model only)
Set the bit value of bit3 is
“0”, and press PAUSE
button. (Note 2)
(MS model only)
Set the bit value of bit1 is
“1”, and press PAUSE
button.(Note 2)
Set the bit value of bit3 is
“0”, and press PAUSE
button. (Note 2)
(MS model only)
Set the bit value of bit1 is
“1”, and press PAUSE
button.(Note 2)
8
0
01
00
Click on the first or last page to see other DCR-HC17E / DCR-HC19E / DCR-HC21 / DCR-HC21E / DCR-HC22E / DCR-HC32 / DCR-HC32E / DCR-HC33 / DCR-HC33E (serv.man4) service manuals if exist.