Read Sony DCR-HC16E / DCR-HC18E / DCR-HC20 / DCR-HC20E (serv.man8) Service Manual online
— 2 —
DCR-HC16E/HC18E/HC20/HC20E_ADJ
6-4. SERVICE MODE
4-3.
SERVICE MODE
< Changed contents (Page 6-52) >
9. Switch check (5)
For the switch check, there are two methods as follows. Confirm the data as shown below before starting the switch check and select the
corresponding method from the following because the switch allocation table is different depending on the versions of the VC board.
corresponding method from the following because the switch allocation table is different depending on the versions of the VC board.
9-1. For “Page: 6, Address: 0A, Data F1 to FF & Page: 6, Address: 0B, Data 00 to 7F (HC20, HC20E) /80 to FF (HC16E, HC18E)”
: Added portion
Page 2
Address 60, 61, 63, 64, 66
Note: The data of page: 0, address: 10 must be “00”.
Using method:
1)
1)
Select page: 2, address: 60, 61, 63, 64, 66.
2)
By discriminating the bit value of display data, the state of the switch can be discriminated.
Address
60
(KEY AD0)
(IC8001 tl)
61
(KEY AD1)
(IC8001 y;)
63
(KEY AD3)
(IC8001 yg)
64
(KEY AD4)
(IC8001 yh)
66
(MULTI JACK IN)
(IC8001 yk)
00
(00 to 0C)
START/STOP
(SS6300 block)
(S001)
START/STOP
(SB6300 block)
(S001)
EASY
(CF6300 block)
(S004)
PANEL REVERSE
(FP-836 flexible)
(S101)
A/V jack
Used
(JK-260 board)
(CN701)
19
(0D to 24)
BACK LIGHT
(CF6300 block)
(S002)
32
(25 to 3F)
LCD BACK LIGHT
ON/OFF
(SB6300 block)
(S002)
PANEL CLOSE
(CF6300 block)
(S001)
96
(82 to AA)
PHOTO
(PHOTO FREEZE)
(SS6300 block)
(S002)
EB
(D8 to FF)
No key input
No key input
PANEL OPEN
(CF6300 block)
(S001)
PANEL NORMAL
(FP-836 flexible)
(S101)
A/V jack
Not used
Not used
(JK-260 board)
(CN701)
4E
(40 to 5D)
PHOTO
(PHOTO REC)
(SS6300 block)
(S002)
Data
Click on the first or last page to see other DCR-HC16E / DCR-HC18E / DCR-HC20 / DCR-HC20E (serv.man8) service manuals if exist.