DCR-HC1000, DCR-HC1000E (serv.man4) - Sony Movie Service Manual (repair manual). Page 68

6-65

DCR-HC1000/HC1000E

Page 7

Address B0 to C6

This data will be kept even if the lithium battery (FP-953 flexible
board BT1001) is removed.

The data of page: 0, address: 10 must be “00”.

B0

“Repaired by” code (Occurred 1st time)   *1

B1

“Block function” code (Occurred 1st time)

B2

“Detailed” code (Occurred 1st time)

B4

“Repaired by” code (Occurred 2nd time)   *1

B5

“Block function” code (Occurred 2nd time)

B6

“Detailed” code (Occurred 2nd time)

B8

“Repaired by” code (Occurred 3rd time)   *1

B9

“Block function” code (Occurred 3rd time)

BA

“Detailed” code (Occurred 3rd time)

BC

“Repaired by” code (Occurred 4th time)   *1

BD

“Block function” code (Occurred 4th time)

BE

“Detailed” code (Occurred 4th time)

C0

“Repaired by” code (Occurred 5th time)   *1

C1

“Block function” code (Occurred 5th time)

C2

“Detailed” code (Occurred 5th time)

C4

“Repaired by” code (Occurred the last time)   *1

C5

“Block function” code (Occurred the last time)

C6

“Detailed” code (Occurred the last time)

*1:

“01” 

t “C”, “03” t “E”

Using method:
1)

The past self-diagnosis codes are displayed at addresses: B0 to C6. Refer to “SELF-DIAGNOSIS CODE TABLE” for detail of the self-
diagnosis code.

Initializing method:
1)

Select page: 7, address: 01, and set data: C0.

2)

Select page: 7, address: 00, set data: 01 and press the PAUSE button.

3)

Check that the data of page: 7, address: B0 to C7 are “00”.

4)

Select page: 7, address: 00, and set data: 00.

5)

Select page: 7, address: 01, and set data: 00.

When the flash error code (E:91:**) is displayed. After repair, clear the error flag in the following method.
1) Select page: 7, address: 01, and set data: 75.
2) Select page: 7, address: 00, set data: 01 and press the PAUSE button.
3) Check that the data of page: 7, address: 02 is “01”.