Read Sony DCR-DVD7 / DCR-DVD7E (serv.man2) Service Manual online
2-9
2. DISASSEMBLY
2. DISASSEMBLY
DCR-DVD7/DVD7E
AC power
adaptor
AC IN
DC-IN
FP-208 flexible board
FP-209 flexible board
Extension cable(10p)
(J-6082-572-A)
(J-6082-572-A)
Flexible board (10p)
(
(
from the Mechanism deck
)
Flexible board (51p)
(
(
from the Mechanism deck
)
LD-183 board
JK-286 board
S451: cabinet (rear) open switch
(Note)
S452: cabinet (rear)
open switch
open switch
(Note)
A/V jack
DC-IN jack
DI-092 board
DA-036 board
CN1007
CN4101
CN1009
Cushion
Cushion
CN4013
CN1002
VC-410 board
CN8505
CN4801
CN5501
VC-410
[SERVICE POSITION TO CHECK THE DVD DRIVE SECTION]
Connection to Check the DVD drive section
Connection to Check the DVD drive section
To check the DVD drive section, set the DVD drive to PLAY mode. (Set PLAY/EDIT mode by using the power switch
or set forced PLAY mode by using the adjustment remote commander.)
Operate the DVD drive using the adjustment remote commander (with the HOLD switch set in the OFF position).
or set forced PLAY mode by using the adjustment remote commander.)
Operate the DVD drive using the adjustment remote commander (with the HOLD switch set in the OFF position).
Note:
Removing the FP-209 flexible board means removing the LID OPEN switch and the dew sensor. Therefore the
DVD drive section will not move even if the forced PLAY mode is set up. By using am adresive tape, hold down
the two open switches (S451,S452)
the two open switches (S451,S452)
Setting the forced PLAY mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: A, address: 10, set data: 02, and press the
PAUSE button of the adjustment remote commander.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: A, address: 10, set data: 02, and press the
PAUSE button of the adjustment remote commander.
Exiting the forced PLAY mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: A, address: 10, set data: 00, and press the
PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: A, address: 10, set data: 00, and press the
PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
DI-092
DA-036
Monitor TV
Adjustment remote
commander (RM-95)
commander (RM-95)
A/V
Video (Yellow)
Multi cable for service
(J-6082-535-A)
Click on the first or last page to see other DCR-DVD7 / DCR-DVD7E (serv.man2) service manuals if exist.